Search the Community
Showing results for tags 'restart'.
Found 6 results
-
Last week, Ford halted production of their F-Series pickup after a fire ravaged a supplier's plant in Southwestern Michigan. While Ford and supplier Meridan said everything was ok, analysts said it the shutdown could hurt Ford if it lasted more than a week. Last night, Ford announced that it would restart production of the F-150 at their Dearborn plant on Friday. Production at Kansas City and Louisville will come back online on Monday. Getting to this point took a lot of work for both Ford and Meridan. According to Automotive News, Ford was the first automaker on site after the fire and was able to retrieve all of the tooling over a 48-hour period. One of dies used was shipped to Meridan's plant in Nottingham, UK. To get it there was a bit of a challenge since it weighs 87,000 pounds. Ford was able to charter an Antonov cargo plane (one of just 21 planes in the world that handle this task) and get it shipped to the UK in just 30 hours. Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork. Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets," said Hau Thai-Tang, Ford's executive vice president of product development and purchasing in a statement. Ford declined to say how much production was lost during the shutdown. James Albertine, an analyst with Consumer Edge Research said the week before that Ford could lose up to 15,000 trucks due per week due to the shutdown. The company is planning to make up for some of the lost production by shortening the summer shutdown at the Dearborn and Kansas City plants. Source: Automotive News (Subscription Required), Ford Ford Restarting F-150, Super Duty Production Ahead Of Schedule After Fire At Magnesium Parts Supplier Ford is resuming production of the F-150 pickup at Dearborn Truck Plant on Friday. Ford team has also successfully repaired the supply chain for Super Duty; production targeted to restart by Monday for Super Duty at Kentucky Truck Plant and F-150 at Kansas City Assembly Plant Ford marshaled a global team of experts, that included partners and suppliers, following a May 2 fire at Meridian Magnesium Products in Eaton Rapids, Mich., to quickly refurbish and relocate tooling needed to produce parts for the Ford F-150, Super Duty and five other vehicles – Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT Because of this quick action, Meridian is producing truck parts again at its Eaton Rapids facility. Plus, Ford airlifted tooling to a Meridian facility in the U.K. to produce parts for F-150, which will further speed production ramp-up Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT production continue uninterrupted Company reaffirms 2018 adjusted EPS guidance range of $1.45 to $1.70; expects adverse impact of $0.12 to $0.14 per share in second quarter due to lost production DEARBORN, Mich., May 16, 2018 – Ford Motor Company is restarting production of the popular F-150 at Dearborn Truck Plant Friday after just over one week of downtime. The company has also successfully repaired the supply chain for Super Duty, with production targeted to restart by Monday at the Kentucky Truck Plant as well as the Kansas City Assembly Plant that also makes F-150 pickups. This follows the massive May 2 fire at the Meridian Magnesium Products facility in Eaton Rapids, Mich. “While the situation remains extremely dynamic, our teams are focused on returning our plants to full production as fast as possible,” said Joe Hinrichs, Ford president, Global Operations. “The ramp-up time to full production is improving every day.” Ford teams, together with suppliers including Walbridge and other contractors, worked nearly around the clock to get America’s best-selling vehicle franchise back on line as quickly as possible. The teams removed 19 dies from Meridian’s badly damaged facility, and in one case, moved an 87,000-pound die from Eaton Rapids, Mich., to Nottingham, U.K., via an Antonov cargo plane – one of the largest in the world – in just 30 hours door-to-door. A die is a tool used to cut or shape material using a press. “Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork,” said Hau Thai-Tang, Ford’s executive vice president of Product Development and Purchasing. “Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets.” Work started immediately in the aftermath of the May 2 fire. Teams removed and remediated safety concerns – including dangling siding – and restored electricity, gaining approval to access the site while debris still smoldered inside. This allowed Ford and Meridian to safely retrieve and relocate tools to more quickly resume part production and work to minimize the financial impact of the stalled plants. Ford recovered, repaired and validated most dies that were at the Eaton Rapids facility, and Meridian is now producing parts for the F-150 at two locations – Eaton Rapids and Nottingham, U.K. Production of bolsters for Super Duty is also restarting at the Eaton Rapids plant. Under normal circumstances, moving tooling the size of a bolster die would take approximately 10 days just to get the proper import and export approvals. However, Ford and its suppliers managed to cut the total time for the entire move to 30 hours, including trans-Atlantic flight time. When the team removed the die from the Eaton Rapids factory, it was shipped to Rickenbacker International Airport in Columbus, Ohio. Rickenbacker had both the capacity to handle such a large piece of equipment and allowed an Antonov An-124 Russian plane, one of the largest planes in the world – typically used to transport trains, dump trucks and even a 25-foot sea yacht – to take off as soon as the equipment was loaded. Nearly 4,000 miles away, a team in Nottingham was waiting to receive the die and take it to Meridian’s nearby factory. In between, the Ford team received a U.K. import license for the die – a mere two hours before the plane touched down. Parts produced at Nottingham are being shipped via daily flights on a Boeing 747 jet until production in Eaton Rapids returns to pre-fire levels. Inventories of Ford’s best-selling F-Series pickups and other vehicles remain strong and customers won’t have a problem finding the model they want. -
Last week, Ford halted production of their F-Series pickup after a fire ravaged a supplier's plant in Southwestern Michigan. While Ford and supplier Meridan said everything was ok, analysts said it the shutdown could hurt Ford if it lasted more than a week. Last night, Ford announced that it would restart production of the F-150 at their Dearborn plant on Friday. Production at Kansas City and Louisville will come back online on Monday. Getting to this point took a lot of work for both Ford and Meridan. According to Automotive News, Ford was the first automaker on site after the fire and was able to retrieve all of the tooling over a 48-hour period. One of dies used was shipped to Meridan's plant in Nottingham, UK. To get it there was a bit of a challenge since it weighs 87,000 pounds. Ford was able to charter an Antonov cargo plane (one of just 21 planes in the world that handle this task) and get it shipped to the UK in just 30 hours. Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork. Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets," said Hau Thai-Tang, Ford's executive vice president of product development and purchasing in a statement. Ford declined to say how much production was lost during the shutdown. James Albertine, an analyst with Consumer Edge Research said the week before that Ford could lose up to 15,000 trucks due per week due to the shutdown. The company is planning to make up for some of the lost production by shortening the summer shutdown at the Dearborn and Kansas City plants. Source: Automotive News (Subscription Required), Ford Ford Restarting F-150, Super Duty Production Ahead Of Schedule After Fire At Magnesium Parts Supplier Ford is resuming production of the F-150 pickup at Dearborn Truck Plant on Friday. Ford team has also successfully repaired the supply chain for Super Duty; production targeted to restart by Monday for Super Duty at Kentucky Truck Plant and F-150 at Kansas City Assembly Plant Ford marshaled a global team of experts, that included partners and suppliers, following a May 2 fire at Meridian Magnesium Products in Eaton Rapids, Mich., to quickly refurbish and relocate tooling needed to produce parts for the Ford F-150, Super Duty and five other vehicles – Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT Because of this quick action, Meridian is producing truck parts again at its Eaton Rapids facility. Plus, Ford airlifted tooling to a Meridian facility in the U.K. to produce parts for F-150, which will further speed production ramp-up Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT production continue uninterrupted Company reaffirms 2018 adjusted EPS guidance range of $1.45 to $1.70; expects adverse impact of $0.12 to $0.14 per share in second quarter due to lost production DEARBORN, Mich., May 16, 2018 – Ford Motor Company is restarting production of the popular F-150 at Dearborn Truck Plant Friday after just over one week of downtime. The company has also successfully repaired the supply chain for Super Duty, with production targeted to restart by Monday at the Kentucky Truck Plant as well as the Kansas City Assembly Plant that also makes F-150 pickups. This follows the massive May 2 fire at the Meridian Magnesium Products facility in Eaton Rapids, Mich. “While the situation remains extremely dynamic, our teams are focused on returning our plants to full production as fast as possible,” said Joe Hinrichs, Ford president, Global Operations. “The ramp-up time to full production is improving every day.” Ford teams, together with suppliers including Walbridge and other contractors, worked nearly around the clock to get America’s best-selling vehicle franchise back on line as quickly as possible. The teams removed 19 dies from Meridian’s badly damaged facility, and in one case, moved an 87,000-pound die from Eaton Rapids, Mich., to Nottingham, U.K., via an Antonov cargo plane – one of the largest in the world – in just 30 hours door-to-door. A die is a tool used to cut or shape material using a press. “Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork,” said Hau Thai-Tang, Ford’s executive vice president of Product Development and Purchasing. “Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets.” Work started immediately in the aftermath of the May 2 fire. Teams removed and remediated safety concerns – including dangling siding – and restored electricity, gaining approval to access the site while debris still smoldered inside. This allowed Ford and Meridian to safely retrieve and relocate tools to more quickly resume part production and work to minimize the financial impact of the stalled plants. Ford recovered, repaired and validated most dies that were at the Eaton Rapids facility, and Meridian is now producing parts for the F-150 at two locations – Eaton Rapids and Nottingham, U.K. Production of bolsters for Super Duty is also restarting at the Eaton Rapids plant. Under normal circumstances, moving tooling the size of a bolster die would take approximately 10 days just to get the proper import and export approvals. However, Ford and its suppliers managed to cut the total time for the entire move to 30 hours, including trans-Atlantic flight time. When the team removed the die from the Eaton Rapids factory, it was shipped to Rickenbacker International Airport in Columbus, Ohio. Rickenbacker had both the capacity to handle such a large piece of equipment and allowed an Antonov An-124 Russian plane, one of the largest planes in the world – typically used to transport trains, dump trucks and even a 25-foot sea yacht – to take off as soon as the equipment was loaded. Nearly 4,000 miles away, a team in Nottingham was waiting to receive the die and take it to Meridian’s nearby factory. In between, the Ford team received a U.K. import license for the die – a mere two hours before the plane touched down. Parts produced at Nottingham are being shipped via daily flights on a Boeing 747 jet until production in Eaton Rapids returns to pre-fire levels. Inventories of Ford’s best-selling F-Series pickups and other vehicles remain strong and customers won’t have a problem finding the model they want. View full article
-
BMW has been in a holding pattern in terms of producing diesel vehicles for the U.S. as they were awaiting approval from the EPA retesting diesel vehicles. Soon, 2017 model year diesel vehicles will be rolling off BMW's assembly lines and heading off to the U.S. "Diesel models will be going into production shortly at our manufacturing plants," said Rebecca K. Kiehne, product & technology spokesperson at BMW of North America to Green Car Reports. As we reported back in October, the EPA was holding back the certifications on a number of diesel vehicles as they subjecting them to new tests to uncover possible cheating - thanks Volkswagen. In our report, BMW said they would not start production of the 3-Series and X3 diesel models until the end of the year. Production of the X5 diesel would begin in January. The production restart of BMW's diesels comes at an interesting time. The EPA is currently investigating the 3.0L EcoDiesel used in the Jeep Grand Cherokee and Ram 1500 for possible violations of the clean air act. Over at Volkswagen, the board has given the ok for the $4.3 billion settlement with the Department of Justice over the diesel emission scandal. Source: Green Car Reports -
BMW has been in a holding pattern in terms of producing diesel vehicles for the U.S. as they were awaiting approval from the EPA retesting diesel vehicles. Soon, 2017 model year diesel vehicles will be rolling off BMW's assembly lines and heading off to the U.S. "Diesel models will be going into production shortly at our manufacturing plants," said Rebecca K. Kiehne, product & technology spokesperson at BMW of North America to Green Car Reports. As we reported back in October, the EPA was holding back the certifications on a number of diesel vehicles as they subjecting them to new tests to uncover possible cheating - thanks Volkswagen. In our report, BMW said they would not start production of the 3-Series and X3 diesel models until the end of the year. Production of the X5 diesel would begin in January. The production restart of BMW's diesels comes at an interesting time. The EPA is currently investigating the 3.0L EcoDiesel used in the Jeep Grand Cherokee and Ram 1500 for possible violations of the clean air act. Over at Volkswagen, the board has given the ok for the $4.3 billion settlement with the Department of Justice over the diesel emission scandal. Source: Green Car Reports View full article
-
Production of the Dodge Viper has been on hiatus since April due to poor sales. But according to Automotive News, Chrysler's Conner Avenue plant will commence Viper production once again next month. While a number of factors are in play for this decision, a big one is the massive increase in sales that the Viper has seen since the $15,000 price cut went into affect last month. Sales in September reached 108 units, an increase of 140 percent when compared to 45 units sold last September. Dodge brand head Tim Kuniskis expressed high hopes for sales in October, a time where sales decline because of the colder weather. When the plant comes back online, the only 2015 models that will be rolling off the line will be the base and GT. Viper T/A and GTS models won't go back into production till the remaining 2013 models sitting on dealer lots are sold. Source: Automotive News (Subscription Required) William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster. -
Production of the Dodge Viper has been on hiatus since April due to poor sales. But according to Automotive News, Chrysler's Conner Avenue plant will commence Viper production once again next month. While a number of factors are in play for this decision, a big one is the massive increase in sales that the Viper has seen since the $15,000 price cut went into affect last month. Sales in September reached 108 units, an increase of 140 percent when compared to 45 units sold last September. Dodge brand head Tim Kuniskis expressed high hopes for sales in October, a time where sales decline because of the colder weather. When the plant comes back online, the only 2015 models that will be rolling off the line will be the base and GT. Viper T/A and GTS models won't go back into production till the remaining 2013 models sitting on dealer lots are sold. Source: Automotive News (Subscription Required) William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster. View full article
