Search the Community
Showing results for tags 'mopar'.
Found 8 results
-
If you thought that the 840 horsepower HEMI found under the Dodge Challenger Demon wasn't enough, then Mopar would like to introduce you to a new crate motor that made its debut yesterday at the SEMA Show. This is the "Hellephant", a 426 cubic inch HEMI V8 with a 3.0L twin-screw supercharger producing 1,000 horsepower and 950 pound-feet of torque on 93 octane pump gas. Muscle car fans will know 426 is an iconic number for Chrysler as the automaker offered this engine in 1964 for a number of models including the Dodge Dart and Plymouth Fury. It earned the nickname of "Elephant" due to its enormous size. About 11,000 of these engines would find a home a Chrysler product due to it costing a fair amount of money to build. Beginning with an aluminum block from the Challenger Drag Pack, Mopar fitted a set custom-forged pistons, a special high-lift cam, valvetrain and valves from the Dodge Challenger SRT Demon; and other parts. Buying the crate engine will get you a kit that includes powertrain control module, power distribution center, engine wiring harness, chassis harness, and other key components. Mopar will also offer a front end accessory kit that includes alternator, power-steering pump, belts, pulleys, and more. No word on pricing, but we're expecting to be over $20,000 considering the 6.2L Supercharged HEMI V8 will set you back $19,995. The engine will become available in the first quarter of 2019. Of course, Mopar decided to build a special vehicle to help with the introduction of the "Hellephant". Their vehicle of choice was a 1968 Dodge Charger. Dubbed Super Charger (I see what you did there), the vehicle has been lowered and the front wheels have been push forward to make room for the wider fenders. A number of parts come from Challenger SRT Hellcat including the six-speed manual transmission. There are a number of unique design traits such as shaved door handles, removal of the vent windows, and dual-walled exhaust tips from the Alfa Romeo Stelvio placed where the taillights would have resided. Gallery: Dodge Super Charger Concept and Hellephant Source: Mopar ‘Hellephant’ in the Room: Mopar Stampedes Into SEMA With 1,000-Horsepower 426 Crate HEMI® Engine “Hellephant” 426 Supercharged Mopar Crate HEMI® Engine and Kit revealed during Mopar press briefing at 2018 SEMA Show in Las Vegas “Hellephant” Mopar Crate Engine delivers mammoth numbers: 1,000 horsepower and 950 lb.-ft. of torque New 1,000-horsepower Crate Engine Kit is another Mopar first-ever feature Logo nods to legendary Mopar 426 HEMI Engine, nicknamed “elephant” engine for its power and size “Hellephant” Crate HEMI Engine Kit allows for relatively simple plug-and-play performance 1968 Dodge “Super Charger” Concept unveiled at SEMA features 1,000-horsepower “Hellephant” engine and kit under the hood Dodge “Super Charger” Concept elevates one of most iconic FCA vehicles with custom modern touches and Mopar products “Hellephant” 426 Supercharged Mopar Crate HEMI Engine and Kit available first quarter of 2019 More information on Mopar Crate HEMI engines available at www.cratehemi.com October 30, 2018 , Las Vegas - The Mopar brand is stampeding into the 2018 Specialty Equipment Market Association (SEMA) Show with a brand-new HEMI®-engine-powered beast: the “Hellephant” 426 Supercharged Mopar Crate HEMI engine, which turns the crank at a mammoth 1,000 horsepower and 950 lb.-ft. of torque. The “Hellephant” 426 Supercharged Mopar Crate HEMI engine is a Mopar-first for a 1,000-horsepower crate engine kit offered by an Original Equipment Manufacturer (OEM). The press briefing today in the Mopar exhibit at SEMA also included the unveiling of the 1968 Dodge “Super Charger” Concept, the perfect package for highlighting the “Hellephant” 426 Supercharged Crate HEMI engine assembly and kit. “Our enthusiasts crave power and performance and our new ‘Hellephant’ Mopar Crate HEMI engine and kit deliver huge horsepower and torque in a plug-and-play package that is unique in the industry,” said Steve Beahm, Head of Parts & Service (Mopar) and Passenger Car Brands, FCA - North America. “The 1968 Dodge Charger is one of the hottest classic cars, which is why we decided to use it as a starting point for the ‘Super Charger’ Concept. It’s an amazing vehicle and a great showcase for our ‘Hellephant’ engine.” The “Hellephant” engine hits the magical 1,000 horsepower mark via bulked-up displacement, with 4.0 inches of stroke and bore specs at 4.125 inches. An improved supercharger with a high-efficiency rotor is mounted on the all-aluminum block, which provides huge weight savings to keep the “Hellephant” light. The all-aluminum block, used in Mopar Dodge Challenger Drag Pak race vehicles that dominated the 2018 NHRA Factory Stock Showdown class, was configured for the street in close collaboration with Mopar and engineers from the motorsports world. The engine and kit’s distinctive “Hellephant” logo provides a nod to the Mopar brand’s past and present. The logo and name call out the legendary 426 HEMI engine, first introduced in 1964 and nicknamed the “elephant” engine for its power and size, as well as the 707-horsepower Mopar “Hellcrate” Engine Kit, revealed last year at the 2017 SEMA Show. The complete engine assembly includes a water pump, flywheel, front sump oil pan, supercharger with throttle body, fuel injectors and coil packs. The first-ever 1,000 horsepower crate engine assembly offered by an OEM can be paired with the Mopar “Hellephant” 426 Supercharged Mopar Crate HEMI Engine Kit for relatively simple plug-and-play by experienced installers. The engine assembly and kit are designed for installation on pre-1976 street and off-road vehicles. Additional features of the “Hellephant” 426 Supercharged Mopar Crate HEMI engine include valve covers imported from the Dodge Challenger SRT Hellcat Redeye and valve train, valves, locks and retainers pulled from the Dodge Challenger SRT Demon. The engine build includes a special high-lift cam, as well as custom-forged pistons. Dropping in the “Hellephant” is almost turnkey with the “Hellephant” 426 Supercharged Mopar Crate HEMI Engine Kit. The kit includes a powertrain control module (PCM), power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors, fuel pump control module and cam bus interface device. The PCM is unlocked and tuned to pump out 1,000 horsepower and 950 lb.-ft. torque. As with the “Hellcrate” engine, Mopar will also offer an essential Front End Accessory Drive (FEAD) Kit, which includes an alternator, power-steering pump, belts, pulleys and more, and is among additional engine accessory hardware components available to assist in installing the “Hellephant.” The kit ships in unique packaging, featuring the “Hellephant” logo and includes in-depth information sheets with helpful installation tips and requirements. The “Hellephant” 426 Supercharged Mopar Crate HEMI engine assembly and kit will be available in the first quarter of 2019. For more information, visit www.cratehemi.com, and follow Mopar on Twitter (@OfficialMopar) using the new #Hellephant hashtag. 1968 Dodge “Super Charger” Concept The 1968 Dodge Charger, one of the most iconic vehicles ever built by FCA US, is reimagined with modern elements from the current Dodge Charger SRT and the Dodge Challenger SRT lineup to create a unique package for showcasing the Mopar brand’s new “Hellephant” 426 Supercharged Mopar Crate HEMI engine and kit. The 1968 Dodge “Super Charger” Concept is adapted to accommodate the “Hellephant” engine, enabling the classic ride to slam 1,000 horsepower to the pavement through a stock T-6060 manual six-speed Dodge Challenger SRT Hellcat transmission. The custom “De Grigio” Grey Metallic classic 1968 Dodge Charger, which is marking its 50th anniversary in 2018, feeds the “Hellephant” fresh air through a supersized hood scoop modeled on that of the Dodge Challenger SRT Demon. The hood features fiberglass construction on the outside with inner-steel construction inside carried over from the original vehicle. The 1968 Charger’s pop-up headlamp design is tweaked to plant Dodge Challenger SRT Hellcat headlamps permanently behind the grille. The original’s door handles and drip rails are shaved away, creating a clean, streamlined appearance. Front door vent windows are removed and replaced with a one-piece side glass. The 1971 Duster mirrors add a more modern appearance. The 1968 Dodge “Super Charger” Concept assumes a “wide body” stance thanks to front and rear fiberglass wheel flares painted “De Grigio” Grey Metallic body color. The front wheels push forward two inches to accommodate the flares and shorten the Charger’s overhang, extending the classic’s wheelbase from 117 inches to 119 inches. Front wheels are stock 20 x 11-inch Devil’s rims pulled from the Challenger SRT Hellcat, while the rears are upsized 21 x 12-inch custom-milled aluminum Devil’s wheels. The body drops 2.5 inches in the rear and 3.5 inches in the front to aggressively hug the pavement. Six-piston Brembos deliver a decisive stopping-power advantage over the 1968 brakes. Custom fiberglass front and rear bumpers are flushed up and shortened cross-car to provide an integrated design. The custom fiberglass front chin splitter takes influence from the Demon, while the custom rear spoiler is inspired by the modern Charger R/T. The trunk key cylinder lock is shaved and the Satin Black fuel door embellished with a custom-milled aluminum “Hellephant” medallion, one of many unique design touches incorporated throughout the “Super Charger” Concept. Vehicle graphics and badging are Satin Black vinyl decals, including the “Hellephant” logo on the front fenders, “Super Charger” badging above the doors and classic tail stripes at the rear. The Product Design Office (PDO) team let their imaginations run wild at the tail of the ’68 Charger. The lower exhaust tips are eliminated and replaced with Alfa Romeo Stelvio 5-inch dual-walled exhaust tips re-engineered to run through the taillamp housing. The brake lights have been uniquely reconfigured with LED lights that glow around the exhaust tips. Inside, door panels and interior trim are Satin Black with the unique “Hellephant” milled medallion applied on the upper door panels. The Dodge Viper steering wheel also carries the “Hellephant” medallion at its center. The instrument panel insert is “De Grigio” Grey Metallic body color and the dash is customized with a full array of Mopar gauges. The body-color center console holds a manual shifter from the Dodge Challenger SRT Hellcat, as well as the ignition button and toggle switches for the headlamps, wipers, fog lights and hazard lights. The stock front seats have been replaced with Dodge Viper seats re-wrapped in Alcantara leather accented with red stitching and are fitted with four-point Sabelt black racing harnesses. The Dodge Challenger SRT Demon seat delete option opens up the rear and also sheds weight while making space for a custom 2-inch roll cage designed to follow the profile and harmonize with the shape of the day light opening (DLO). A Challenger SRT Demon net allows for storage of racing equipment such as helmets and gloves. A black Challenger SRT Hellcat carpet covers the rear of the interior, while the front features custom floor mats modified from the current Charger SRT and Mopar pedal kits for the Challenger. View full article
-
If you thought that the 840 horsepower HEMI found under the Dodge Challenger Demon wasn't enough, then Mopar would like to introduce you to a new crate motor that made its debut yesterday at the SEMA Show. This is the "Hellephant", a 426 cubic inch HEMI V8 with a 3.0L twin-screw supercharger producing 1,000 horsepower and 950 pound-feet of torque on 93 octane pump gas. Muscle car fans will know 426 is an iconic number for Chrysler as the automaker offered this engine in 1964 for a number of models including the Dodge Dart and Plymouth Fury. It earned the nickname of "Elephant" due to its enormous size. About 11,000 of these engines would find a home a Chrysler product due to it costing a fair amount of money to build. Beginning with an aluminum block from the Challenger Drag Pack, Mopar fitted a set custom-forged pistons, a special high-lift cam, valvetrain and valves from the Dodge Challenger SRT Demon; and other parts. Buying the crate engine will get you a kit that includes powertrain control module, power distribution center, engine wiring harness, chassis harness, and other key components. Mopar will also offer a front end accessory kit that includes alternator, power-steering pump, belts, pulleys, and more. No word on pricing, but we're expecting to be over $20,000 considering the 6.2L Supercharged HEMI V8 will set you back $19,995. The engine will become available in the first quarter of 2019. Of course, Mopar decided to build a special vehicle to help with the introduction of the "Hellephant". Their vehicle of choice was a 1968 Dodge Charger. Dubbed Super Charger (I see what you did there), the vehicle has been lowered and the front wheels have been push forward to make room for the wider fenders. A number of parts come from Challenger SRT Hellcat including the six-speed manual transmission. There are a number of unique design traits such as shaved door handles, removal of the vent windows, and dual-walled exhaust tips from the Alfa Romeo Stelvio placed where the taillights would have resided. Gallery: Dodge Super Charger Concept and Hellephant Source: Mopar ‘Hellephant’ in the Room: Mopar Stampedes Into SEMA With 1,000-Horsepower 426 Crate HEMI® Engine “Hellephant” 426 Supercharged Mopar Crate HEMI® Engine and Kit revealed during Mopar press briefing at 2018 SEMA Show in Las Vegas “Hellephant” Mopar Crate Engine delivers mammoth numbers: 1,000 horsepower and 950 lb.-ft. of torque New 1,000-horsepower Crate Engine Kit is another Mopar first-ever feature Logo nods to legendary Mopar 426 HEMI Engine, nicknamed “elephant” engine for its power and size “Hellephant” Crate HEMI Engine Kit allows for relatively simple plug-and-play performance 1968 Dodge “Super Charger” Concept unveiled at SEMA features 1,000-horsepower “Hellephant” engine and kit under the hood Dodge “Super Charger” Concept elevates one of most iconic FCA vehicles with custom modern touches and Mopar products “Hellephant” 426 Supercharged Mopar Crate HEMI Engine and Kit available first quarter of 2019 More information on Mopar Crate HEMI engines available at www.cratehemi.com October 30, 2018 , Las Vegas - The Mopar brand is stampeding into the 2018 Specialty Equipment Market Association (SEMA) Show with a brand-new HEMI®-engine-powered beast: the “Hellephant” 426 Supercharged Mopar Crate HEMI engine, which turns the crank at a mammoth 1,000 horsepower and 950 lb.-ft. of torque. The “Hellephant” 426 Supercharged Mopar Crate HEMI engine is a Mopar-first for a 1,000-horsepower crate engine kit offered by an Original Equipment Manufacturer (OEM). The press briefing today in the Mopar exhibit at SEMA also included the unveiling of the 1968 Dodge “Super Charger” Concept, the perfect package for highlighting the “Hellephant” 426 Supercharged Crate HEMI engine assembly and kit. “Our enthusiasts crave power and performance and our new ‘Hellephant’ Mopar Crate HEMI engine and kit deliver huge horsepower and torque in a plug-and-play package that is unique in the industry,” said Steve Beahm, Head of Parts & Service (Mopar) and Passenger Car Brands, FCA - North America. “The 1968 Dodge Charger is one of the hottest classic cars, which is why we decided to use it as a starting point for the ‘Super Charger’ Concept. It’s an amazing vehicle and a great showcase for our ‘Hellephant’ engine.” The “Hellephant” engine hits the magical 1,000 horsepower mark via bulked-up displacement, with 4.0 inches of stroke and bore specs at 4.125 inches. An improved supercharger with a high-efficiency rotor is mounted on the all-aluminum block, which provides huge weight savings to keep the “Hellephant” light. The all-aluminum block, used in Mopar Dodge Challenger Drag Pak race vehicles that dominated the 2018 NHRA Factory Stock Showdown class, was configured for the street in close collaboration with Mopar and engineers from the motorsports world. The engine and kit’s distinctive “Hellephant” logo provides a nod to the Mopar brand’s past and present. The logo and name call out the legendary 426 HEMI engine, first introduced in 1964 and nicknamed the “elephant” engine for its power and size, as well as the 707-horsepower Mopar “Hellcrate” Engine Kit, revealed last year at the 2017 SEMA Show. The complete engine assembly includes a water pump, flywheel, front sump oil pan, supercharger with throttle body, fuel injectors and coil packs. The first-ever 1,000 horsepower crate engine assembly offered by an OEM can be paired with the Mopar “Hellephant” 426 Supercharged Mopar Crate HEMI Engine Kit for relatively simple plug-and-play by experienced installers. The engine assembly and kit are designed for installation on pre-1976 street and off-road vehicles. Additional features of the “Hellephant” 426 Supercharged Mopar Crate HEMI engine include valve covers imported from the Dodge Challenger SRT Hellcat Redeye and valve train, valves, locks and retainers pulled from the Dodge Challenger SRT Demon. The engine build includes a special high-lift cam, as well as custom-forged pistons. Dropping in the “Hellephant” is almost turnkey with the “Hellephant” 426 Supercharged Mopar Crate HEMI Engine Kit. The kit includes a powertrain control module (PCM), power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors, fuel pump control module and cam bus interface device. The PCM is unlocked and tuned to pump out 1,000 horsepower and 950 lb.-ft. torque. As with the “Hellcrate” engine, Mopar will also offer an essential Front End Accessory Drive (FEAD) Kit, which includes an alternator, power-steering pump, belts, pulleys and more, and is among additional engine accessory hardware components available to assist in installing the “Hellephant.” The kit ships in unique packaging, featuring the “Hellephant” logo and includes in-depth information sheets with helpful installation tips and requirements. The “Hellephant” 426 Supercharged Mopar Crate HEMI engine assembly and kit will be available in the first quarter of 2019. For more information, visit www.cratehemi.com, and follow Mopar on Twitter (@OfficialMopar) using the new #Hellephant hashtag. 1968 Dodge “Super Charger” Concept The 1968 Dodge Charger, one of the most iconic vehicles ever built by FCA US, is reimagined with modern elements from the current Dodge Charger SRT and the Dodge Challenger SRT lineup to create a unique package for showcasing the Mopar brand’s new “Hellephant” 426 Supercharged Mopar Crate HEMI engine and kit. The 1968 Dodge “Super Charger” Concept is adapted to accommodate the “Hellephant” engine, enabling the classic ride to slam 1,000 horsepower to the pavement through a stock T-6060 manual six-speed Dodge Challenger SRT Hellcat transmission. The custom “De Grigio” Grey Metallic classic 1968 Dodge Charger, which is marking its 50th anniversary in 2018, feeds the “Hellephant” fresh air through a supersized hood scoop modeled on that of the Dodge Challenger SRT Demon. The hood features fiberglass construction on the outside with inner-steel construction inside carried over from the original vehicle. The 1968 Charger’s pop-up headlamp design is tweaked to plant Dodge Challenger SRT Hellcat headlamps permanently behind the grille. The original’s door handles and drip rails are shaved away, creating a clean, streamlined appearance. Front door vent windows are removed and replaced with a one-piece side glass. The 1971 Duster mirrors add a more modern appearance. The 1968 Dodge “Super Charger” Concept assumes a “wide body” stance thanks to front and rear fiberglass wheel flares painted “De Grigio” Grey Metallic body color. The front wheels push forward two inches to accommodate the flares and shorten the Charger’s overhang, extending the classic’s wheelbase from 117 inches to 119 inches. Front wheels are stock 20 x 11-inch Devil’s rims pulled from the Challenger SRT Hellcat, while the rears are upsized 21 x 12-inch custom-milled aluminum Devil’s wheels. The body drops 2.5 inches in the rear and 3.5 inches in the front to aggressively hug the pavement. Six-piston Brembos deliver a decisive stopping-power advantage over the 1968 brakes. Custom fiberglass front and rear bumpers are flushed up and shortened cross-car to provide an integrated design. The custom fiberglass front chin splitter takes influence from the Demon, while the custom rear spoiler is inspired by the modern Charger R/T. The trunk key cylinder lock is shaved and the Satin Black fuel door embellished with a custom-milled aluminum “Hellephant” medallion, one of many unique design touches incorporated throughout the “Super Charger” Concept. Vehicle graphics and badging are Satin Black vinyl decals, including the “Hellephant” logo on the front fenders, “Super Charger” badging above the doors and classic tail stripes at the rear. The Product Design Office (PDO) team let their imaginations run wild at the tail of the ’68 Charger. The lower exhaust tips are eliminated and replaced with Alfa Romeo Stelvio 5-inch dual-walled exhaust tips re-engineered to run through the taillamp housing. The brake lights have been uniquely reconfigured with LED lights that glow around the exhaust tips. Inside, door panels and interior trim are Satin Black with the unique “Hellephant” milled medallion applied on the upper door panels. The Dodge Viper steering wheel also carries the “Hellephant” medallion at its center. The instrument panel insert is “De Grigio” Grey Metallic body color and the dash is customized with a full array of Mopar gauges. The body-color center console holds a manual shifter from the Dodge Challenger SRT Hellcat, as well as the ignition button and toggle switches for the headlamps, wipers, fog lights and hazard lights. The stock front seats have been replaced with Dodge Viper seats re-wrapped in Alcantara leather accented with red stitching and are fitted with four-point Sabelt black racing harnesses. The Dodge Challenger SRT Demon seat delete option opens up the rear and also sheds weight while making space for a custom 2-inch roll cage designed to follow the profile and harmonize with the shape of the day light opening (DLO). A Challenger SRT Demon net allows for storage of racing equipment such as helmets and gloves. A black Challenger SRT Hellcat carpet covers the rear of the interior, while the front features custom floor mats modified from the current Charger SRT and Mopar pedal kits for the Challenger.- 3 comments
-
- 1
-
-
- 426 hemi v8
- hellephant
- (and 3 more)
-
If you wanted to drop FCA's monstrous Hellcat supercharged V8 into a project vehicle of yours, you needed to go down to your local salvage yard to rip one out of a Charger or Challenger Hellcat that met a premature end. But that will be changing this week at the SEMA Show. Mopar has announced that it will be seeling a crate version of the Hellcat engine. There will also be a Mopar “Hellcrate” HEMI Engine Kit that includes the necessary items to make for an easier swap such as a wiring harness, powertrain control module. oxygen sensors, fuel pump control module, and other bits. An optional Front End Accessory Drive kit brings an alternator, power steering pump, belts, pulleys, and other key parts. Before you start planning a Hellcat transplant into a Fiat 500L, Mopar says the kit is "intended for pre-1976 street and off-road vehicles." That doesn't mean you can't do this with a modern vehicle, it will only mean a bit more work to pull it off. “Never before has a supercharged, factory-direct 707-horsepower crate engine kit been offered, and we are proud to be the first to deliver a solution enthusiasts have demanded. This ultimate powertrain option fits the needs of owners and fans who demand iconic performance,” said Pietro Gorlier, Head of Parts and Service (Mopar), FCA. The Hellcrate will set you back $19,530, while the engine kit will cost $2,195. Source: Mopar Press Release is on Page 2 Mopar Unleashes ‘Hellcrate’ 6.2-liter Supercharged Crate HEMI® Engine Kit at SEMA Additional Product News on Tap at Brand’s Tuesday Evening SEMA Product Presentation New Mopar 6.2-liter supercharged Crate HEMI® Engine Kit — dubbed the “Hellcrate” — will debut at 2017 Specialty Equipment Market Association (SEMA) Show Mopar introduces its first-ever supercharged, 707-horsepower factory-backed crate engine kit Mopar “Hellcrate” HEMI Engine Kit “plugs and plays” with 6.2-liter supercharged Crate HEMI Engine, delivering 707 horsepower and 650 lb.-ft. of torque Graveyard Carz star Mark Worman will join Mopar again at SEMA, debut 1970 Superbird Tribute build with new Mopar “Hellcrate” HEMI Engine Kit Mopar “Hellcrate” HEMI Engine Kit and 6.2-liter supercharged Crate HEMI Engine available for ordering at www.moparhemicrate.com October 30, 2017 , Auburn Hills, Mich. - Enthusiasts demanded it, and now the Mopar brand is unleashing a new Mopar 6.2-liter supercharged Crate HEMI® Engine Kit — nicknamed the “Hellcrate” — that injects 707 horsepower and 650 lb.-ft. of torque under the hood. The Mopar “Hellcrate” HEMI Engine Kit, the first-ever supercharged, 707-horsepower factory-backed crate engine kit, will debut in the brand’s 15,345-square-foot exhibit at the 2017 Specialty Equipment Market Association (SEMA) Show, scheduled for Oct. 31 to Nov. 3. The release of the new Mopar “Hellcrate” HEMI Engine Kit will be followed by the unveiling of additional high-profile news during the brand’s Mopar SEMA product presentation, scheduled for Tuesday, Oct. 31 at 7:26 p.m. ET/4:26 p.m. PT. The product presentation can be viewed live at https://livestream.com/FCALive/MoparSEMA2017. “Never before has a supercharged, factory-direct 707-horsepower crate engine kit been offered, and we are proud to be the first to deliver a solution enthusiasts have demanded,” said Pietro Gorlier, Head of Parts and Service (Mopar), FCA. “This ultimate powertrain option fits the needs of owners and fans who demand iconic performance.” The new Mopar “Hellcrate” HEMI Engine kit provides relatively simple “plug and play” with the 6.2-liter supercharged Crate HEMI Engine assembly — also available from Mopar. The Mopar “Hellcrate” HEMI Engine Kit marries modern 707 horsepower with authentic, factory-backed quality. The kit includes a powertrain control module (PCM), power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors and fuel pump control module for the 6.2-liter supercharged Crate HEMI Engine. The PCM is unlocked and set to the factory 707- horsepower calibration. The Mopar “Hellcrate” HEMI Engine Kit is optimized for use with manual transmissions, such as the Tremec Magnum transmission kit. An essential Front End Accessory Drive (FEAD) Kit, which includes an alternator, power steering pump, belts, pulleys and more, is among additional engine accessory hardware components available to assist in installing the Mopar “Hellcrate” HEMI Engine Kit. The kit, intended for pre-1976 street and off-road vehicles, ships in unique packaging featuring the “Hellcrate” logo and includes in-depth information sheets with helpful installation tips and requirements. The Mopar “Hellcrate” 6.2-liter supercharged Crate HEMI Engine assembly (Part Number 68303089AA) is available for a Manufacturer’s Suggested Retail Price (MSRP) of $19,530. The Mopar “Hellcrate” 6.2-liter supercharged Crate HEMI Engine Kit (Part Number 177072452) is available at an MSRP of $2,195. The Mopar “Hellcrate” HEMI Engine Kit and Mopar “Hellcrate” 6.2-liter supercharged Crate HEMI Engine assembly feature a Mopar three-year/unlimited mileage warranty when purchased together. For more information or to order, visit www.moparhemicrate.com. -
If you wanted to drop FCA's monstrous Hellcat supercharged V8 into a project vehicle of yours, you needed to go down to your local salvage yard to rip one out of a Charger or Challenger Hellcat that met a premature end. But that will be changing this week at the SEMA Show. Mopar has announced that it will be seeling a crate version of the Hellcat engine. There will also be a Mopar “Hellcrate” HEMI Engine Kit that includes the necessary items to make for an easier swap such as a wiring harness, powertrain control module. oxygen sensors, fuel pump control module, and other bits. An optional Front End Accessory Drive kit brings an alternator, power steering pump, belts, pulleys, and other key parts. Before you start planning a Hellcat transplant into a Fiat 500L, Mopar says the kit is "intended for pre-1976 street and off-road vehicles." That doesn't mean you can't do this with a modern vehicle, it will only mean a bit more work to pull it off. “Never before has a supercharged, factory-direct 707-horsepower crate engine kit been offered, and we are proud to be the first to deliver a solution enthusiasts have demanded. This ultimate powertrain option fits the needs of owners and fans who demand iconic performance,” said Pietro Gorlier, Head of Parts and Service (Mopar), FCA. The Hellcrate will set you back $19,530, while the engine kit will cost $2,195. Source: Mopar Press Release is on Page 2 Mopar Unleashes ‘Hellcrate’ 6.2-liter Supercharged Crate HEMI® Engine Kit at SEMA Additional Product News on Tap at Brand’s Tuesday Evening SEMA Product Presentation New Mopar 6.2-liter supercharged Crate HEMI® Engine Kit — dubbed the “Hellcrate” — will debut at 2017 Specialty Equipment Market Association (SEMA) Show Mopar introduces its first-ever supercharged, 707-horsepower factory-backed crate engine kit Mopar “Hellcrate” HEMI Engine Kit “plugs and plays” with 6.2-liter supercharged Crate HEMI Engine, delivering 707 horsepower and 650 lb.-ft. of torque Graveyard Carz star Mark Worman will join Mopar again at SEMA, debut 1970 Superbird Tribute build with new Mopar “Hellcrate” HEMI Engine Kit Mopar “Hellcrate” HEMI Engine Kit and 6.2-liter supercharged Crate HEMI Engine available for ordering at www.moparhemicrate.com October 30, 2017 , Auburn Hills, Mich. - Enthusiasts demanded it, and now the Mopar brand is unleashing a new Mopar 6.2-liter supercharged Crate HEMI® Engine Kit — nicknamed the “Hellcrate” — that injects 707 horsepower and 650 lb.-ft. of torque under the hood. The Mopar “Hellcrate” HEMI Engine Kit, the first-ever supercharged, 707-horsepower factory-backed crate engine kit, will debut in the brand’s 15,345-square-foot exhibit at the 2017 Specialty Equipment Market Association (SEMA) Show, scheduled for Oct. 31 to Nov. 3. The release of the new Mopar “Hellcrate” HEMI Engine Kit will be followed by the unveiling of additional high-profile news during the brand’s Mopar SEMA product presentation, scheduled for Tuesday, Oct. 31 at 7:26 p.m. ET/4:26 p.m. PT. The product presentation can be viewed live at https://livestream.com/FCALive/MoparSEMA2017. “Never before has a supercharged, factory-direct 707-horsepower crate engine kit been offered, and we are proud to be the first to deliver a solution enthusiasts have demanded,” said Pietro Gorlier, Head of Parts and Service (Mopar), FCA. “This ultimate powertrain option fits the needs of owners and fans who demand iconic performance.” The new Mopar “Hellcrate” HEMI Engine kit provides relatively simple “plug and play” with the 6.2-liter supercharged Crate HEMI Engine assembly — also available from Mopar. The Mopar “Hellcrate” HEMI Engine Kit marries modern 707 horsepower with authentic, factory-backed quality. The kit includes a powertrain control module (PCM), power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors and fuel pump control module for the 6.2-liter supercharged Crate HEMI Engine. The PCM is unlocked and set to the factory 707- horsepower calibration. The Mopar “Hellcrate” HEMI Engine Kit is optimized for use with manual transmissions, such as the Tremec Magnum transmission kit. An essential Front End Accessory Drive (FEAD) Kit, which includes an alternator, power steering pump, belts, pulleys and more, is among additional engine accessory hardware components available to assist in installing the Mopar “Hellcrate” HEMI Engine Kit. The kit, intended for pre-1976 street and off-road vehicles, ships in unique packaging featuring the “Hellcrate” logo and includes in-depth information sheets with helpful installation tips and requirements. The Mopar “Hellcrate” 6.2-liter supercharged Crate HEMI Engine assembly (Part Number 68303089AA) is available for a Manufacturer’s Suggested Retail Price (MSRP) of $19,530. The Mopar “Hellcrate” 6.2-liter supercharged Crate HEMI Engine Kit (Part Number 177072452) is available at an MSRP of $2,195. The Mopar “Hellcrate” HEMI Engine Kit and Mopar “Hellcrate” 6.2-liter supercharged Crate HEMI Engine assembly feature a Mopar three-year/unlimited mileage warranty when purchased together. For more information or to order, visit www.moparhemicrate.com. View full article
-
By William Maley Staff Writer - CheersandGears.com March 24, 2013 The Ford Raptor doesn't have any competition. Okay, you could make the argument that the Ram Runner is the closest one. The difference between the two is that the Raptor is built on the production line, while the Ram Runner is built at a dealership after a buyer buys the modifications necessary. That could be an item of the past for Ram as Chrysler debates whether to offer it as a production model. “My boss would really like us to try to do a little more research on the Raptor and how it does (in the market),” said Pat Dougherty, the vice president of Mopar parts, sales and field operations. “If we could see that the volume was significant enough that it makes sense to do it, we’ll do it. But if we don’t, then we’ll continue to do it the way we do it.” Source: Wards Auto William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster. -
By William Maley Staff Writer - CheersandGears.com March 24, 2013 The Ford Raptor doesn't have any competition. Okay, you could make the argument that the Ram Runner is the closest one. The difference between the two is that the Raptor is built on the production line, while the Ram Runner is built at a dealership after a buyer buys the modifications necessary. That could be an item of the past for Ram as Chrysler debates whether to offer it as a production model. “My boss would really like us to try to do a little more research on the Raptor and how it does (in the market),” said Pat Dougherty, the vice president of Mopar parts, sales and field operations. “If we could see that the volume was significant enough that it makes sense to do it, we’ll do it. But if we don’t, then we’ll continue to do it the way we do it.” Source: Wards Auto William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster. View full article
-
By William Maley Staff Writer - CheersandGears.com February 4, 2013 Besides the Challenger R/T Redline package, Chrysler will also being showing the new and limited edition Mopar 13' Dart at the Chicago Auto Show this week. The Mopar 13' Dart is the forth special-edition, Mopar-badged model since Chrysler became part of Fiat in 2009. The Mopar 13' Dart's exterior is decked out in gloss black paint with contrasting Mopar Blue racing stripes. The exterior also benefits from a ground effects kit that includes a front lip, one-piece trunk spoiler, and rear diffuser. Inside, the Mopar Dart has a Mopar Blue leather seat with contrasting black accents for the driver, and black leather with blue accent stitching for the rest of interior. Under the hood there is a 1.4L MultiAir turbocharged engine mated to a six-speed manual transmission. Mopar fitted a sport-tuned exhaust system to give a more meatier noise. Other changes include a sport suspension kit, premium brake kit with slotted rotors, and a revised steering calibration. Only 500 Mopar 13' Darts will be built. No information on pricing or a release date has been announced. Source: Chrysler Album: Mopar 13' Dart 5 images 0 comments William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] you can follow him on twitter at @realmudmonster. Press Release is on Page 2 Chrysler Group LLC Introduces New Mopar ’13 Dodge Dart Select Mopar parts and accessories outfit new Mopar ’13 Dart Performance upgrades include lowered sport suspension, revised steering calibration, sport-tuned exhaust, ground-effects kit, and premium brake kit with slotted rotors Custom leather Mopar driver’s seat Industry-first wireless charging for smartphones 500 numbered units to be built at company’s assembly plant in Belvidere, Ill. Limited-edition vehicle to be displayed at Chicago Auto Show Mopar ’13 information to go live at http://www.dodge.com/en/2013//dart-mopar13/ tomorrow, Friday, Feb. 1 Auburn Hills, Mich. , Jan 31, 2013 - Chrysler Group LLC today introduced the limited-edition Mopar ’13 Dart, marking the fourth special-edition Mopar-badged vehicle created since the company partnered with Fiat S.p.A in 2009. The car will be shown at next week’s Chicago Auto Show. Building on the success of the Mopar ’10 Challenger, Mopar ’11 Charger and the Mopar ’12 300, the limited-edition Mopar ’13 Dart will be built and customized with Mopar performance parts and accessories. Production for a limited run of 500 units will begin this spring at the company’s assembly plant in Belvidere, Ill. “Our new Mopar ’13 Dart will turn heads and stand out from the crowd,” said Pietro Gorlier, President and CEO of Mopar, Chrysler Group’s service, parts and customer-care brand. “For this special, limited-edition vehicle, we specifically kept the driver in mind as we added select Mopar parts and accessories.” Inspired by the tuner scene, the Mopar ’13 Dart is designed for driving enthusiasts. Powered by a 1.4-liter MultiAir® intercooled turbo engine with a manual transmission, the Mopar ’13 sports a gloss-black finish with a pair of car-length Mopar Blue stripes, which mirror each of the three previous Mopar-themed models. For enhanced handling, upgrades include a performance steering-gear calibration, a 7 millimeter-lowered suspension and low-profile 40 aspect performance tires (225/40R18). From the racing scene, Mopar added a premium brake kit with slotted rotors. Engine breathing is enhanced with a performance-tuned exhaust and to further optimize aerodynamics and increase downforce, the custom Dart features Mopar’s ground-effects kit, which includes a front-chin spoiler, one-piece deck-lid spoiler, as well as a unique and aggressively styled rear diffuser. Unique exterior elements include a Mopar badge in the crosshair grille and gloss-black 18-inch wheels with a Mopar logo on the wheel center caps. The vehicle’s unique interior, featuring a serialized plate, gives the driver a custom Mopar Blue leather seat with black accents. To keep the emphasis on the driver, the driver seat is Mopar Blue while all other seats are black with blue accent stitching. The centerpiece of the interior is a floating island bezel that is accented with Mopar Blue paint and lighting. The interior is further enhanced with rich details, including Mopar Blue accent thread, as well as light-black chrome and gloss-black elements. Along with a Mopar serialized badge on the dash, the special-edition Mopar ’13 includes industry-first wireless charging for smartphones, a blue-stitched leather-wrapped steering wheel with an identically garnished shifter knob, a bright sport-pedal kit, premium Mopar carpet floor mats, door-sill guards and an 8.4-inch navigation screen. The limited-edition Mopar ’13 Dart will be delivered to each customer with a personalized owner kit. Assembled in a custom-made black case, contents include a personalized plate with vehicle specifications, the date of manufacture and the unique identification number (of 500) of the vehicle. Along with a Mopar ’13 brochure and other memorabilia, the kit will include a limited-edition sketch of the vehicle signed by Mark Trostle, Chrysler Group Chief Designer for the Mopar Brand. Information on the Mopar ’13 will be go live at http://www.dodge.com/en/2013//dart-mopar13/ tomorrow, Friday, Feb. 1 View full article
-
By William Maley Staff Writer - CheersandGears.com February 4, 2013 Besides the Challenger R/T Redline package, Chrysler will also being showing the new and limited edition Mopar 13' Dart at the Chicago Auto Show this week. The Mopar 13' Dart is the forth special-edition, Mopar-badged model since Chrysler became part of Fiat in 2009. The Mopar 13' Dart's exterior is decked out in gloss black paint with contrasting Mopar Blue racing stripes. The exterior also benefits from a ground effects kit that includes a front lip, one-piece trunk spoiler, and rear diffuser. Inside, the Mopar Dart has a Mopar Blue leather seat with contrasting black accents for the driver, and black leather with blue accent stitching for the rest of interior. Under the hood there is a 1.4L MultiAir turbocharged engine mated to a six-speed manual transmission. Mopar fitted a sport-tuned exhaust system to give a more meatier noise. Other changes include a sport suspension kit, premium brake kit with slotted rotors, and a revised steering calibration. Only 500 Mopar 13' Darts will be built. No information on pricing or a release date has been announced. Source: Chrysler Album: Mopar 13' Dart 5 images 0 comments William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] you can follow him on twitter at @realmudmonster. Press Release is on Page 2 Chrysler Group LLC Introduces New Mopar ’13 Dodge Dart Select Mopar parts and accessories outfit new Mopar ’13 Dart Performance upgrades include lowered sport suspension, revised steering calibration, sport-tuned exhaust, ground-effects kit, and premium brake kit with slotted rotors Custom leather Mopar driver’s seat Industry-first wireless charging for smartphones 500 numbered units to be built at company’s assembly plant in Belvidere, Ill. Limited-edition vehicle to be displayed at Chicago Auto Show Mopar ’13 information to go live at http://www.dodge.com/en/2013//dart-mopar13/ tomorrow, Friday, Feb. 1 Auburn Hills, Mich. , Jan 31, 2013 - Chrysler Group LLC today introduced the limited-edition Mopar ’13 Dart, marking the fourth special-edition Mopar-badged vehicle created since the company partnered with Fiat S.p.A in 2009. The car will be shown at next week’s Chicago Auto Show. Building on the success of the Mopar ’10 Challenger, Mopar ’11 Charger and the Mopar ’12 300, the limited-edition Mopar ’13 Dart will be built and customized with Mopar performance parts and accessories. Production for a limited run of 500 units will begin this spring at the company’s assembly plant in Belvidere, Ill. “Our new Mopar ’13 Dart will turn heads and stand out from the crowd,” said Pietro Gorlier, President and CEO of Mopar, Chrysler Group’s service, parts and customer-care brand. “For this special, limited-edition vehicle, we specifically kept the driver in mind as we added select Mopar parts and accessories.” Inspired by the tuner scene, the Mopar ’13 Dart is designed for driving enthusiasts. Powered by a 1.4-liter MultiAir® intercooled turbo engine with a manual transmission, the Mopar ’13 sports a gloss-black finish with a pair of car-length Mopar Blue stripes, which mirror each of the three previous Mopar-themed models. For enhanced handling, upgrades include a performance steering-gear calibration, a 7 millimeter-lowered suspension and low-profile 40 aspect performance tires (225/40R18). From the racing scene, Mopar added a premium brake kit with slotted rotors. Engine breathing is enhanced with a performance-tuned exhaust and to further optimize aerodynamics and increase downforce, the custom Dart features Mopar’s ground-effects kit, which includes a front-chin spoiler, one-piece deck-lid spoiler, as well as a unique and aggressively styled rear diffuser. Unique exterior elements include a Mopar badge in the crosshair grille and gloss-black 18-inch wheels with a Mopar logo on the wheel center caps. The vehicle’s unique interior, featuring a serialized plate, gives the driver a custom Mopar Blue leather seat with black accents. To keep the emphasis on the driver, the driver seat is Mopar Blue while all other seats are black with blue accent stitching. The centerpiece of the interior is a floating island bezel that is accented with Mopar Blue paint and lighting. The interior is further enhanced with rich details, including Mopar Blue accent thread, as well as light-black chrome and gloss-black elements. Along with a Mopar serialized badge on the dash, the special-edition Mopar ’13 includes industry-first wireless charging for smartphones, a blue-stitched leather-wrapped steering wheel with an identically garnished shifter knob, a bright sport-pedal kit, premium Mopar carpet floor mats, door-sill guards and an 8.4-inch navigation screen. The limited-edition Mopar ’13 Dart will be delivered to each customer with a personalized owner kit. Assembled in a custom-made black case, contents include a personalized plate with vehicle specifications, the date of manufacture and the unique identification number (of 500) of the vehicle. Along with a Mopar ’13 brochure and other memorabilia, the kit will include a limited-edition sketch of the vehicle signed by Mark Trostle, Chrysler Group Chief Designer for the Mopar Brand. Information on the Mopar ’13 will be go live at http://www.dodge.com/en/2013//dart-mopar13/ tomorrow, Friday, Feb. 1
