Search the Community
Showing results for tags 'Transmission'.
-
Ford is acknowledging the trouble prone Ford Powershift transmission and is extending the warranties on them. The 6-speed transmission is a dual clutch setup meant to increase fuel economy in Ford's smallest cars. While a solid idea on paper, customers reported a number of problems with them including slippage, hesitations while accelerating, jerkiness through the gears, difficulty downshifting, and premature wear on the clutch packs. The extended warranty will cover 2014 - 2016 model year Ford Focus, and 2014 - 2015 model year Ford Fiesta and will increase the warranty coverage of the clutch from five years/60,000 miles to seven years/100,000 miles. Ford will also reimburse customers in this group who have already paid for clutch repairs out of pockets. The transmission control module will also be warrantied to 10 years/150,000 miles. In addition to that, there is a small group of customers (16%) who need a software update which Ford will provide for free. Affected customers will receive a letter from Ford with instructions on how to proceed. -
Ford is acknowledging the trouble prone Ford Powershift transmission and is extending the warranties on them. The 6-speed transmission is a dual clutch setup meant to increase fuel economy in Ford's smallest cars. While a solid idea on paper, customers reported a number of problems with them including slippage, hesitations while accelerating, jerkiness through the gears, difficulty downshifting, and premature wear on the clutch packs. The extended warranty will cover 2014 - 2016 model year Ford Focus, and 2014 - 2015 model year Ford Fiesta and will increase the warranty coverage of the clutch from five years/60,000 miles to seven years/100,000 miles. Ford will also reimburse customers in this group who have already paid for clutch repairs out of pockets. The transmission control module will also be warrantied to 10 years/150,000 miles. In addition to that, there is a small group of customers (16%) who need a software update which Ford will provide for free. Affected customers will receive a letter from Ford with instructions on how to proceed. View full article
-
The minivan is not quite dead yet and the Honda Odyssey, one of the five remaining minivans still in production, is entering its 25th year on the market. Since its launch in 1995, the Odyssey has sold more than 2.7 million units. Honda is quick to point out that most of these are retail sales and not fleet. The Odyssey has been the number one retail seller in the segment for 9 years running. For 2020, all Odysseys will be upgraded to a new 10-speed automatic transmission. This is mated to the existing 280 horsepower 3.5 liter V6 driving the front wheels. Also for 2020, Honda is offering a $1500 25th Anniversary package that includes a chrome roof rack, body side moldings, chrome rear bumper protector, extra 25th Anniversary badges, illuminated sill plates, and for an additional $1,300, special 19-inch wheels. The Honda Odyssey is built in Honda's Lincoln Alabama manufacturing plant alongside the Pilot, Passport, and Ridgeline. View full article
-
The minivan is not quite dead yet and the Honda Odyssey, one of the five remaining minivans still in production, is entering its 25th year on the market. Since its launch in 1995, the Odyssey has sold more than 2.7 million units. Honda is quick to point out that most of these are retail sales and not fleet. The Odyssey has been the number one retail seller in the segment for 9 years running. For 2020, all Odysseys will be upgraded to a new 10-speed automatic transmission. This is mated to the existing 280 horsepower 3.5 liter V6 driving the front wheels. Also for 2020, Honda is offering a $1500 25th Anniversary package that includes a chrome roof rack, body side moldings, chrome rear bumper protector, extra 25th Anniversary badges, illuminated sill plates, and for an additional $1,300, special 19-inch wheels. The Honda Odyssey is built in Honda's Lincoln Alabama manufacturing plant alongside the Pilot, Passport, and Ridgeline. -
Since the launch of the XT4 with the rather anemic (if more refined) LSY engine, many (including myself) had questioned why GM does not offer the Tripower 310 bhp / 348 lb-ft (L3B) 2.7T 4-cylinder in the XT4 (at least) as an option. To a lesser extent some have also questioned why the LSY is putting out a mere 237bhp / 258 lb-ft whereas the outgoing LTG engine is good for 265~272 bhp / 295 lb-ft. Is it just so that it can have 258 lb-ft arrive @ 1,500 rpm? Now, we have the answer... It's the 9-speed Automatics. Adopting the 9-speed automatics is deemed a priority for refinement and fuel economy. The new GM-Ford 9TXX transmissions, jointly developed with Ford promises better fuel economy and better shift quality. There are currently two versions of this transmission:- 9T50 -- 258 lb-ft 9T65 -- 280 lb-ft The need to pack 9-speeds into a very slim transmission case meant that they have to use an ovoid cross section torque converter, a tension chain coupling and abandon the high torque capability of the previous generation top dog 6T80 (369 lb-ft) transmissions used in the 410 hp / 368 lb-ft 3.6L Twin-Turbo (LF3) powered Cadillac XTS. The lack of torque capability is also in part why Ford abandoned the use of the GM-Ford 9TXX transmissions, choosing instead to develop an 8-speed evolution of the decade old 6T80 for use in their high torque applications like the Ford Edge ST (2.7L Ecoboost V6 with 335 hp / 380 lb-ft). Ford also asserts that the new 9-speed autos did not yield any fuel economy improvement when tested with their engines and the refinement improvements alone did not justify the costs and weight increases. View full article
- 52 replies
-
- 5
-
-
-
-
- general motors
- gm
- (and 2 more)
-
Since the launch of the XT4 with the rather anemic (if more refined) LSY engine, many (including myself) had questioned why GM does not offer the Tripower 310 bhp / 348 lb-ft (L3B) 2.7T 4-cylinder in the XT4 (at least) as an option. To a lesser extent some have also questioned why the LSY is putting out a mere 237bhp / 258 lb-ft whereas the outgoing LTG engine is good for 265~272 bhp / 295 lb-ft. Is it just so that it can have 258 lb-ft arrive @ 1,500 rpm? Now, we have the answer... It's the 9-speed Automatics. Adopting the 9-speed automatics is deemed a priority for refinement and fuel economy. The new GM-Ford 9TXX transmissions, jointly developed with Ford promises better fuel economy and better shift quality. There are currently two versions of this transmission:- 9T50 -- 258 lb-ft 9T65 -- 280 lb-ft The need to pack 9-speeds into a very slim transmission case meant that they have to use an ovoid cross section torque converter, a tension chain coupling and abandon the high torque capability of the previous generation top dog 6T80 (369 lb-ft) transmissions used in the 410 hp / 368 lb-ft 3.6L Twin-Turbo (LF3) powered Cadillac XTS. The lack of torque capability is also in part why Ford abandoned the use of the GM-Ford 9TXX transmissions, choosing instead to develop an 8-speed evolution of the decade old 6T80 for use in their high torque applications like the Ford Edge ST (2.7L Ecoboost V6 with 335 hp / 380 lb-ft). Ford also asserts that the new 9-speed autos did not yield any fuel economy improvement when tested with their engines and the refinement improvements alone did not justify the costs and weight increases.- 52 comments
-
- 1
-
-
- general motors
- gm
- (and 2 more)
-
Since the launch of the XT4 with the rather anemic (if more refined) LSY engine, many (including myself) had questioned why GM does not offer the Tripower 310 bhp / 348 lb-ft (L3B) 2.7T 4-cylinder in the XT4 (at least) as an option. To a lesser extent some have also questioned why the LSY is putting out a mere 237bhp / 258 lb-ft whereas the outgoing LTG engine is good for 265~272 bhp / 295 lb-ft. Is it just so that it can have 258 lb-ft arrive @ 1,500 rpm? Now, we have the answer... It's the 9-speed Automatics. Adopting the 9-speed automatics is deemed a priority for refinement and fuel economy. The new GM-Ford 9TXX transmissions, jointly developed with Ford promises better fuel economy and better shift quality. There are currently two versions of this transmission:- 9T50 -- 258 lb-ft 9T65 -- 280 lb-ft The need to pack 9-speeds into a very slim transmission case meant that they have to use an ovoid cross section torque converter, a tension chain coupling and abandon the high torque capability of the previous generation top dog 6T80 (369 lb-ft) transmissions used in the 410 hp / 368 lb-ft 3.6L Twin-Turbo (LF3) powered Cadillac XTS. The lack of torque capability is also in part why Ford abandoned the use of the GM-Ford 9TXX transmissions, choosing instead to develop an 8-speed evolution of the decade old 6T80 for use in their high torque applications like the Ford Edge ST (2.7L Ecoboost V6 with 335 hp / 380 lb-ft). Ford also asserts that the new 9-speed autos did not yield any fuel economy improvement when tested with their engines and the refinement improvements alone did not justify the costs and weight increases. This post has been promoted to an article This post has been promoted to an article View full article
-
Since the launch of the XT4 with the rather anemic (if more refined) LSY engine, many (including myself) had questioned why GM does not offer the Tripower 310 bhp / 348 lb-ft (L3B) 2.7T 4-cylinder in the XT4 (at least) as an option. To a lesser extent some have also questioned why the LSY is putting out a mere 237bhp / 258 lb-ft whereas the outgoing LTG engine is good for 265~272 bhp / 295 lb-ft. Is it just so that it can have 258 lb-ft arrive @ 1,500 rpm? Now, we have the answer... It's the 9-speed Automatics. Adopting the 9-speed automatics is deemed a priority for refinement and fuel economy. The new GM-Ford 9TXX transmissions, jointly developed with Ford promises better fuel economy and better shift quality. There are currently two versions of this transmission:- 9T50 -- 258 lb-ft 9T65 -- 280 lb-ft The need to pack 9-speeds into a very slim transmission case meant that they have to use an ovoid cross section torque converter, a tension chain coupling and abandon the high torque capability of the previous generation top dog 6T80 (369 lb-ft) transmissions used in the 410 hp / 368 lb-ft 3.6L Twin-Turbo (LF3) powered Cadillac XTS. The lack of torque capability is also in part why Ford abandoned the use of the GM-Ford 9TXX transmissions, choosing instead to develop an 8-speed evolution of the decade old 6T80 for use in their high torque applications like the Ford Edge ST (2.7L Ecoboost V6 with 335 hp / 380 lb-ft). Ford also asserts that the new 9-speed autos did not yield any fuel economy improvement when tested with their engines and the refinement improvements alone did not justify the costs and weight increases. This post has been promoted to an article View full article
-
Since the launch of the XT4 with the rather anemic (if more refined) LSY engine, many (including myself) had questioned why GM does not offer the Tripower 310 bhp / 348 lb-ft (L3B) 2.7T 4-cylinder in the XT4 (at least) as an option. To a lesser extent some have also questioned why the LSY is putting out a mere 237bhp / 258 lb-ft whereas the outgoing LTG engine is good for 265~272 bhp / 295 lb-ft. Is it just so that it can have 258 lb-ft arrive @ 1,500 rpm? Now, we have the answer... It's the 9-speed Automatics. Adopting the 9-speed automatics is deemed a priority for refinement and fuel economy. The new GM-Ford 9TXX transmissions, jointly developed with Ford promises better fuel economy and better shift quality. There are currently two versions of this transmission:- 9T50 -- 258 lb-ft 9T65 -- 280 lb-ft The need to pack 9-speeds into a very slim transmission case meant that they have to use an ovoid cross section torque converter, a tension chain coupling and abandon the high torque capability of the previous generation top dog 6T80 (369 lb-ft) transmissions used in the 410 hp / 368 lb-ft 3.6L Twin-Turbo (LF3) powered Cadillac XTS. The lack of torque capability is also in part why Ford abandoned the use of the GM-Ford 9TXX transmissions, choosing instead to develop an 8-speed evolution of the decade old 6T80 for use in their high torque applications like the Ford Edge ST (2.7L Ecoboost V6 with 335 hp / 380 lb-ft). Ford also asserts that the new 9-speed autos did not yield any fuel economy improvement when tested with their engines and the refinement improvements alone did not justify the costs and weight increases. View full article
-
Your probably thinking, did I read the teaser right? Did it really say 2,581 lb-ft of torque or 3,500 NM from a 160 horsepower or 120 kW motor with torque vectoring? Yes, Yes you did! GKN Automotive is proud to unveil the world's first battery electric vehicle (BEV) with a two-speed transmission and torque vectoring. GTD19 demonstrator vehicle is built from a Jeep Renegade and is currently in Arjeplog, Sweden undergoing winter testing. To prove the industry-leading standards of efficiency, safety and driving dynamics in this BEV model, GKN choose to go with a FWD version where torque vectoring can provide noticeable benefits than in a rear wheel drive or all-wheel drive platform. To Quote GKN: Why a two-speed gearbox? The setup in the GTD19 is engineered to ensure the shifts are seamless, with minimal loss of power and torque while providing faster acceleration and higher top speed with improved efficiency. What is the top speed you ask? The eTwinsterX allows a top speed of 155 mph or 250 kph. To quote Hannes Prenn, COO of GKN ePowertrain: The all new eTwinster powertrain can be easily adapted and integrated into existing vehicle platform for FWD, RWD or AWD configurations. Twinster torque vectoring delivers swift and smooth acceleration while providing greater lateral control and optimized driving dynamics. GKN has stated their eTwinster system is smaller than many equivalent systems from competitors allowing it to be easily integrated into existing vehicle plate forms as they did with the GTD19 replacing it's ICE powertrain. The small size allowed GKN to install in place of the ICE, the complete solution of electric motor, inverter controls, eAxle along with all required cabling leading to a very thin battery pack underneath the GTD19. GKN system integration allows them to offer the eTwinster powertrain as a readily adaptable solution for all types of auto's from all-wheel drive hypercars to plug-in hybrid luxury SUVs to entry-level city cars. If you have ever been in a Range Rover Evoque Hybrid, then you have already experienced the Twinster system as it can be added to the Hybrid solution with the Twinster unit in the back helping to improve the dynamics and calibration of the auto. This GKN solution will also show up in the Opel Insignia. To quote GKN: Where else will you see this amazing system that was the number one hybrid / electric vehicle system shown at the Geneva Auto show this year is in the BMW M3 Concept, Volvo XC90 demonstrator which will be paired with the T8 Twin Engine Plug-in Hybrids as well as Mercedes-Benz AMB GLA45 prototype. -
Your probably thinking, did I read the teaser right? Did it really say 2,581 lb-ft of torque or 3,500 NM from a 160 horsepower or 120 kW motor with torque vectoring? Yes, Yes you did! GKN Automotive is proud to unveil the world's first battery electric vehicle (BEV) with a two-speed transmission and torque vectoring. GTD19 demonstrator vehicle is built from a Jeep Renegade and is currently in Arjeplog, Sweden undergoing winter testing. To prove the industry-leading standards of efficiency, safety and driving dynamics in this BEV model, GKN choose to go with a FWD version where torque vectoring can provide noticeable benefits than in a rear wheel drive or all-wheel drive platform. To Quote GKN: Why a two-speed gearbox? The setup in the GTD19 is engineered to ensure the shifts are seamless, with minimal loss of power and torque while providing faster acceleration and higher top speed with improved efficiency. What is the top speed you ask? The eTwinsterX allows a top speed of 155 mph or 250 kph. To quote Hannes Prenn, COO of GKN ePowertrain: The all new eTwinster powertrain can be easily adapted and integrated into existing vehicle platform for FWD, RWD or AWD configurations. Twinster torque vectoring delivers swift and smooth acceleration while providing greater lateral control and optimized driving dynamics. GKN has stated their eTwinster system is smaller than many equivalent systems from competitors allowing it to be easily integrated into existing vehicle plate forms as they did with the GTD19 replacing it's ICE powertrain. The small size allowed GKN to install in place of the ICE, the complete solution of electric motor, inverter controls, eAxle along with all required cabling leading to a very thin battery pack underneath the GTD19. GKN system integration allows them to offer the eTwinster powertrain as a readily adaptable solution for all types of auto's from all-wheel drive hypercars to plug-in hybrid luxury SUVs to entry-level city cars. If you have ever been in a Range Rover Evoque Hybrid, then you have already experienced the Twinster system as it can be added to the Hybrid solution with the Twinster unit in the back helping to improve the dynamics and calibration of the auto. This GKN solution will also show up in the Opel Insignia. To quote GKN: Where else will you see this amazing system that was the number one hybrid / electric vehicle system shown at the Geneva Auto show this year is in the BMW M3 Concept, Volvo XC90 demonstrator which will be paired with the T8 Twin Engine Plug-in Hybrids as well as Mercedes-Benz AMB GLA45 prototype. View full article- 5 replies
-
- 1
-
-
- electric vehicle
- etwinsterx
- (and 5 more)
-
GM has announced total investments of $56M for capacity expansion to be spread over two of its existing manufacturing plants GM said in a press statement. $20M will be going to its Romulus Michigan propulsion plant to expand capacity of 10-speed transmission manufacturing. The investment will be used to purchase additional machining equipment. GM 10-speed is used in their full-size rear-wheel drive SUVs and trucks. The Romulus plant currently employs about 1,350 people and also builds V6 engines. Expansion of the Romulus plant implies GM is preparing to expand the transmission to more models. An additional $36M in investment will go into its Lansing Delta Township plant to expand production and get ready for the refreshed Chevrolet Traverse and Buick Enclave crossovers. Built in 2006, Lansing Delta Township is GM's newest manufacturing facility. -
GM has announced total investments of $56M for capacity expansion to be spread over two of its existing manufacturing plants GM said in a press statement. $20M will be going to its Romulus Michigan propulsion plant to expand capacity of 10-speed transmission manufacturing. The investment will be used to purchase additional machining equipment. GM 10-speed is used in their full-size rear-wheel drive SUVs and trucks. The Romulus plant currently employs about 1,350 people and also builds V6 engines. Expansion of the Romulus plant implies GM is preparing to expand the transmission to more models. An additional $36M in investment will go into its Lansing Delta Township plant to expand production and get ready for the refreshed Chevrolet Traverse and Buick Enclave crossovers. Built in 2006, Lansing Delta Township is GM's newest manufacturing facility. View full article
-
BMW's vice-president of sales and marketing for the M division, Peter Quintus believes that manual and dual-clutch transmissions will be going the way of the dodo bird performance vehicles. According to Drive, Qunitus has been banging the drum on the demise of manual transmissions for a bit. The reason isn't due to emissions but comes down them not being able to handle engines with loads of torque - saying 600Nm of torque (about 442 lb-ft). When asked about using a manual transmission from the U.S. that is able to handle all of this torque, Qunitus said the company found them to be "heavy and the shift quality was awful." The admission of Dual-clutch transmissions not long for this world is bit surprising as more manufacturers are beginning to install them into their performance vehicles as they would deliver fast shifts. That is changing with automatics as new technologies help them shift as fast as DCTs. "We are now seeing automatic transmissions with nine and even 10 speeds, so there's a lot of technology in modern automatics," said Quintus. "The DCT once had two advantages: it was light and its shift speeds were higher. Now, a lot of that shift-time advantage has disappeared as automatics get better and smarter." Source: Drive View full article -
BMW's vice-president of sales and marketing for the M division, Peter Quintus believes that manual and dual-clutch transmissions will be going the way of the dodo bird performance vehicles. According to Drive, Qunitus has been banging the drum on the demise of manual transmissions for a bit. The reason isn't due to emissions but comes down them not being able to handle engines with loads of torque - saying 600Nm of torque (about 442 lb-ft). When asked about using a manual transmission from the U.S. that is able to handle all of this torque, Qunitus said the company found them to be "heavy and the shift quality was awful." The admission of Dual-clutch transmissions not long for this world is bit surprising as more manufacturers are beginning to install them into their performance vehicles as they would deliver fast shifts. That is changing with automatics as new technologies help them shift as fast as DCTs. "We are now seeing automatic transmissions with nine and even 10 speeds, so there's a lot of technology in modern automatics," said Quintus. "The DCT once had two advantages: it was light and its shift speeds were higher. Now, a lot of that shift-time advantage has disappeared as automatics get better and smarter." Source: Drive -
UPDATE: The folks at Temple of VTEC were able to find the quote from Car Magazine that the CivicX forums referenced. "Doubtless power will continue to be transmitted by today's magical six-speed manual gearbox, with its tightly packed ratios. There's no indication of a dual-clutch gearbox for the Civic: the announced automated option is a CVT, although engineer Kariya hastily adds that he's tried to head-off the typical rev-metal thrash by making the cooking engines tractable at low revs." We can see how some may think the Civic Type R could be getting a CVT from reading this (emphasis ours). But there is one key thing to be aware of. The line bolded mentions the Civic, not the Civic Type-R. To put this story to rest, Temple of VTEC reached out to Honda for comment. Honda said that the Type R would only come with a six-speed manual. Those worried that Honda was going mad can breath a sigh of relief. Source: Temple of VTEC We're finally getting our chance to sample some forbidden fruit in the form of the Honda Civic Type R when it launches later this year. For awhile, we've known that the Type R would be coming with a six-speed manual transmission only. But it seems there is another transmission option on the horizon and one that will disappoint a number of enthusiasts. (SEE UPDATE ABOVE). In the November issue of Car Magazine (via the CivicX forums), the publication spoke with three senior Honda folks, Mirsuru Kariya - Head engineer of Civic Daisuke Tsutamori - Head designer of Civic Katsushi Inoue - Head of Honda Europe One interesting bit of information that came out of this was the Type R getting the option of a CVT transmission. Yes, we can already hear the cries of those who believe Honda is watering the vehicle down. First, this an option as the manual will be standard. Second, engineers have reportedly tuned the transmission for low-end acceleration. Source: CivicX View full article
-
UPDATE: The folks at Temple of VTEC were able to find the quote from Car Magazine that the CivicX forums referenced. "Doubtless power will continue to be transmitted by today's magical six-speed manual gearbox, with its tightly packed ratios. There's no indication of a dual-clutch gearbox for the Civic: the announced automated option is a CVT, although engineer Kariya hastily adds that he's tried to head-off the typical rev-metal thrash by making the cooking engines tractable at low revs." We can see how some may think the Civic Type R could be getting a CVT from reading this (emphasis ours). But there is one key thing to be aware of. The line bolded mentions the Civic, not the Civic Type-R. To put this story to rest, Temple of VTEC reached out to Honda for comment. Honda said that the Type R would only come with a six-speed manual. Those worried that Honda was going mad can breath a sigh of relief. Source: Temple of VTEC We're finally getting our chance to sample some forbidden fruit in the form of the Honda Civic Type R when it launches later this year. For awhile, we've known that the Type R would be coming with a six-speed manual transmission only. But it seems there is another transmission option on the horizon and one that will disappoint a number of enthusiasts. (SEE UPDATE ABOVE). In the November issue of Car Magazine (via the CivicX forums), the publication spoke with three senior Honda folks, Mirsuru Kariya - Head engineer of Civic Daisuke Tsutamori - Head designer of Civic Katsushi Inoue - Head of Honda Europe One interesting bit of information that came out of this was the Type R getting the option of a CVT transmission. Yes, we can already hear the cries of those who believe Honda is watering the vehicle down. First, this an option as the manual will be standard. Second, engineers have reportedly tuned the transmission for low-end acceleration. Source: CivicX -
This story is posted by MSN in their auto forum from a U.S. News and World Report story on "Why Are Manual Transmission Disappearing?" Thought it was an interesting piece. I agree with some of what is said but also feel there is a lack of effort on why some might still want a manual or how they can keep the value by being an informed sales person. I will agree that the best anti-theft device is a manual transmission now. Seems the news has more and more stories about the craziness of people breaking in to steal an auto and when it is a manual they end up having to leave. http://www.msn.com/en-us/autos/ownership/why-are-manual-transmissions-disappearing/ar-BBwHYFp?li=BBnb7Kz
-
Fiat Chrysler Automobiles isn't out of the dog house when it comes to vehicles rolling away. A few months after issuing a recall on a number of models equipped with the stubby transmission lever for rolling away, NHTSA is investigating models equipped with the rotary knob gear selector for the same problem. The investigation is looking at the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango which have the rotary knob selector. NHTSA has gotten 43 complaints about these models moving away. Out of the 43 complaints, 25 have resulted in crashes and another 9 resulted in injuries. NHTSA also says that 34 complaints said the vehicle was moving while in park. FCA said it is cooperating with the investigation. In the meantime, FCA and NHTSA are urging owners to engage the parking brake Source: NHTSA, Reuters View full article
-
NHTSA Investigates Dodge Durango and Ram 1500s Rolling Away
William Maley posted an article in Chrysler
Fiat Chrysler Automobiles isn't out of the dog house when it comes to vehicles rolling away. A few months after issuing a recall on a number of models equipped with the stubby transmission lever for rolling away, NHTSA is investigating models equipped with the rotary knob gear selector for the same problem. The investigation is looking at the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango which have the rotary knob selector. NHTSA has gotten 43 complaints about these models moving away. Out of the 43 complaints, 25 have resulted in crashes and another 9 resulted in injuries. NHTSA also says that 34 complaints said the vehicle was moving while in park. FCA said it is cooperating with the investigation. In the meantime, FCA and NHTSA are urging owners to engage the parking brake Source: NHTSA, Reuters -
In light of fresh competition in the form of the refreshed Toyota Tacoma and new Honda Ridgeline, Chevrolet has announced some updates for the 2017 Colorado. First is a new 3.6L V6 producing 308 horsepower and 275 pound-feet of torque (up 3 horsepower and 6 pound-feet). Changes to the engine include a revised direct injection system, updated variable valve timing, and cylinder deactivation. We can't help but wonder if this is the same engine that resides in a number of Cadillac models. A new eight-speed automatic transmission is hooked up to the V6. The transmission features a higher first gear (helps with towing or hauling a heavy load) and lower rear axle ratios will improve fuel economy. At the moment, we don't have EPA numbers for the V6 or pricing details. We do know the 2017 Colorado will go on sale later this year. Expect a similar announcement for the GMC Canyon in the near future. Source: Chevrolet Press Release is on Page 2 Chevrolet Colorado Resets the Bar for Midsize Segment 2017 model updated with all-new V-6 and class-exclusive eight-speed automatic DETROIT – For 2017, the Chevrolet Colorado offers an all-new V-6 engine and class-exclusive eight-speed automatic. It is the latest major update for Colorado, which entered the market for model year 2015. Chevrolet is on track to sell more than 160,000 Colorados in the first 24 months on the market, reigniting the midsize segment. “Customers made the Colorado an overnight success and it remains one of the industry’s hottest-selling products,” said Anita Burke, Colorado chief engineer. “That fast success has justified our continued investment in midsize pickups, introducing new features for our customers such as the class-exclusive diesel engine, advanced technologies like Apple CarPlay and Android Auto and now a class-leading V-6 and eight-speed automatic powertrain combination.” Class-exclusive powertrain combination The most significant update for the 2017 Colorado is an all-new V-6 engine and eight-speed transmission, creating a combination that’s unmatched in the midsize segment. According to Stan Ludlow, chief engineer for the 2017 Colorado, the engine and transmission were calibrated to emphasize performance and refinement while optimizing fuel economy: “The Colorado is currently the most fuel-efficient pickup truck in America, with an EPA-estimated 31 mpg highway when equipped with the diesel engine. As such, for the new V-6 and eight-speed combination we focused on improving everyday driving performance. Drivers will immediately notice that it pulls harder when accelerating from a stop or passing on the highway; it is more confident pulling a trailer up a steep grade and it is more refined cruising at a constant highway speed.” This second generation of Chevrolet’s double-overhead-cam engine architecture retains the same 3.6L displacement as before, with an updated suite of advanced engine technologies. This includes improved variable valve timing for intake and exhaust, improved direct injection and for the first time, Active Fuel Management (cylinder deactivation), which disables two cylinders under light throttle applications. Horsepower and torque increase to an SAE-certified 308 hp (230 kW) at 6,800 rpm and 275 lb-ft (373 nM) at 4,000 rpm. The engine is mated to the class-exclusive eight-speed automatic. The GM-developed Hydra-Matic 8L45 is roughly the same size and weight as the 6L80 six-speed automatic it replaces. However, the eight-speed automatic offers a wider 7.0 overall gear ratio spread than the 6L80 transmission’s 6.0 ratio. This results in a numerically higher first gear ratio, helping drivers start off more confidently with a heavy load or when trailering, and numerically lower rear axle ratios that reduce engine rpm on the highway for improved efficiency. Extensive use of aluminum and magnesium, combined with similar packaging to the outgoing 6L80 transmission, equates to no increase in overall weight for Colorado models equipped with the new 8L45 transmission. The 2017 model year updates, including the new V-6 and eight-speed combination, will arrive at dealerships in the fourth quarter of this year. View full article
-
In light of fresh competition in the form of the refreshed Toyota Tacoma and new Honda Ridgeline, Chevrolet has announced some updates for the 2017 Colorado. First is a new 3.6L V6 producing 308 horsepower and 275 pound-feet of torque (up 3 horsepower and 6 pound-feet). Changes to the engine include a revised direct injection system, updated variable valve timing, and cylinder deactivation. We can't help but wonder if this is the same engine that resides in a number of Cadillac models. A new eight-speed automatic transmission is hooked up to the V6. The transmission features a higher first gear (helps with towing or hauling a heavy load) and lower rear axle ratios will improve fuel economy. At the moment, we don't have EPA numbers for the V6 or pricing details. We do know the 2017 Colorado will go on sale later this year. Expect a similar announcement for the GMC Canyon in the near future. Source: Chevrolet Press Release is on Page 2 Chevrolet Colorado Resets the Bar for Midsize Segment 2017 model updated with all-new V-6 and class-exclusive eight-speed automatic DETROIT – For 2017, the Chevrolet Colorado offers an all-new V-6 engine and class-exclusive eight-speed automatic. It is the latest major update for Colorado, which entered the market for model year 2015. Chevrolet is on track to sell more than 160,000 Colorados in the first 24 months on the market, reigniting the midsize segment. “Customers made the Colorado an overnight success and it remains one of the industry’s hottest-selling products,” said Anita Burke, Colorado chief engineer. “That fast success has justified our continued investment in midsize pickups, introducing new features for our customers such as the class-exclusive diesel engine, advanced technologies like Apple CarPlay and Android Auto and now a class-leading V-6 and eight-speed automatic powertrain combination.” Class-exclusive powertrain combination The most significant update for the 2017 Colorado is an all-new V-6 engine and eight-speed transmission, creating a combination that’s unmatched in the midsize segment. According to Stan Ludlow, chief engineer for the 2017 Colorado, the engine and transmission were calibrated to emphasize performance and refinement while optimizing fuel economy: “The Colorado is currently the most fuel-efficient pickup truck in America, with an EPA-estimated 31 mpg highway when equipped with the diesel engine. As such, for the new V-6 and eight-speed combination we focused on improving everyday driving performance. Drivers will immediately notice that it pulls harder when accelerating from a stop or passing on the highway; it is more confident pulling a trailer up a steep grade and it is more refined cruising at a constant highway speed.” This second generation of Chevrolet’s double-overhead-cam engine architecture retains the same 3.6L displacement as before, with an updated suite of advanced engine technologies. This includes improved variable valve timing for intake and exhaust, improved direct injection and for the first time, Active Fuel Management (cylinder deactivation), which disables two cylinders under light throttle applications. Horsepower and torque increase to an SAE-certified 308 hp (230 kW) at 6,800 rpm and 275 lb-ft (373 nM) at 4,000 rpm. The engine is mated to the class-exclusive eight-speed automatic. The GM-developed Hydra-Matic 8L45 is roughly the same size and weight as the 6L80 six-speed automatic it replaces. However, the eight-speed automatic offers a wider 7.0 overall gear ratio spread than the 6L80 transmission’s 6.0 ratio. This results in a numerically higher first gear ratio, helping drivers start off more confidently with a heavy load or when trailering, and numerically lower rear axle ratios that reduce engine rpm on the highway for improved efficiency. Extensive use of aluminum and magnesium, combined with similar packaging to the outgoing 6L80 transmission, equates to no increase in overall weight for Colorado models equipped with the new 8L45 transmission. The 2017 model year updates, including the new V-6 and eight-speed combination, will arrive at dealerships in the fourth quarter of this year. -
G. David Felt Staff Writer Alternative Energy - www.CheersandGears.com Manual Trans, Woman versus Men! Are Men becoming soft? Came across this story on Autoblog. After more than 50,000+ leases reviewed at swapalease.com shows that woman more than men enjoy driving a manual trans. Sadly this seems to point to the save the manual campaign as failing as manual auto purchases are a dying breed. According to the data, leases on Manual auto's have dropped by 22%. In 2012 85.4% of Manual Trans leases were by men, 2015 that number had dropped to 81.2%. Woman on the other hand in 2012 was 14.6% of their leases were a manual transmission but in 2015 that number has rose to 18.8%. Now more and more editorials are clarifying that as a road trip car, manuals are more fun, but as a daily driver for work, they are terrible. So what do you guys think. Is this a trend that Manuals could disappear from the roads of North America in the near future or will they survive but only in select performance based auto's or what? Sound Off
-
So in cruising the alternative world I found on the Green Car reports two stories about Ford having an 11 speed transmission which they have filed a patent for; http://www.greencarreports.com/news/1097339_ford-patent-for-11-speed-automatic-transmission-wars-escalate Fiat having a 40 mpg 500 with 11 speed transmission; http://www.greencarreports.com/news/1097766_electric-car-battery-costs-40-mpg-surprise-11-speed-automatic-todays-car-news So with battery cost falling and the transmission war kicking in. I wonder how high we will see these transmissions go?
-
Jeep News: Jeep Cherokees Still Waiting On Fix For Transmission
William Maley posted a topic in Jeep
William Maley Staff Writer - CheersandGears.com October 15, 2013 It has been a few weeks since we reported on the Jeep Cherokee and its transmission woes and the news hasn't gotten better. The Detroit News is reporting that Cherokees are still parked at the Toledo factory where they are built. There is some good news though. Chrysler appears to be in final stages of testing a new powertrain calibration that should help the transmission and get vehicles onto dealer lots. “Chrysler Group is in the final stages of validating the updated powertrain calibrations,” said Gualberto Ranieri, vice president of communications for Chrysler. “Once the latest powertrain calibration is validated, the company will be able to quickly update the powertrain software on Cherokees already built and ship vehicles to dealerships around the country in quantity.” This should be good news to buyers who have been waiting quite awhile to get their hands on their vehicles. Source: The Detroit News William Maley is a staff writer for Cheers & Gears. He can be reached at [email protected] or you can follow him on twitter at @realmudmonster. View full article
