2020 Jeep Gladiator Finally Arrives: Comments

[William Maley]

---

It has been a long time coming but Jeep has finally brought out the model that many have been clamoring for, a Wrangler pickup.

This is the 2020 Gladiator and describing this a four-door Wangler with a bed is doing it a bit of disservice. Compared to the Wrangler, the Gladiator rides on a wheelbase that 19.4-inches longer and the frame has been extended by 31-inches. This increase in size does hurt off-road capability as the Gladiator has a lower breakover and departure angle when compared to the Wrangler. But that's the tradeoff you make for more utility.

The bed comes in at five feet and is comprised of steel with an aluminum tailgate. Features for the bed include tie-down points, LED bed lighting, and power outlets. The rest of the Gladiator's design is the same as the Wrangler, down to the doors being removable and the choice of either a soft or hard-top.

For the interior, Jeep has added a clever party trick. The rear bench seat can be folded flat to make for flat space for cargo. The seats can also be folded up 'stadium style' to reveal a set of pockets. Otherwise, the Gladiator's interior is the same as the Wrangler with a well laid out dash and the choice of either a 7 or 8.4-inch infotainment system.

At launch, the Gladiator will come with 3.6L Pentastar V6 with 285 horsepower and 260 pound-feet of torque. This can be teamed with either a six-speed manual or eight-speed automatic. If you want some stump-pulling power, you need to wait until 2020 for a redesigned 3.0L turbodiesel V6 with 260 horsepower and 442 pound-feet of torque. This will be paired with an eight-speed automatic only. No mention of fuel economy figures for either engine.

The Gladiator promises to be quite capable, offering a max payload of 1,600 pounds and max towing of 7,650 pounds. For off-road adventures, the truck comes equipped with either a Command-Trac (two-speed transfer case with a 2.72:1 low-range gear ratio and a set of heavy-duty third-generation Dana 44 front and rear axles with a 3.73 rear axle ratio) or Rock-Trac 4x4 system (two-speed transfer case with a 4:1 low-range gear ratio and a electronic sway-bar disconnect).

Jeep will begin producing the Gladiator in the first-half of next year at their Toledo, Ohio plant. Expect pricing to come out sometime before production kicks off.

Gallery: 2020 Jeep Gladiator

Source: Jeep

---

All-new 2020 Jeep® Gladiator: The Most Capable Midsize Truck Ever

• Legendary 4x4 Capability, Authentic Design Builds on Rich Jeep Truck Heritage, Best-in-class Towing and 4x4 Payload, Clever Functionality and Versatility, Advanced Fuel-efficient Powertrains, Open-air Freedom, and Loaded with Safety Features and Intuitive Technology
• Unmatched capability with Command-Trac and Rock-Trac 4x4 systems, third-generation Dana 44 axles, Tru-Lock electric front- and rear-axle lockers, Trac-Lok limited-slip differential, segment-exclusive electronic sway-bar disconnect and 33-inch off-road tires 
  • Unmatched crawl ratios
  • Up to 30 inches of water fording
• Best-in-class towing and 4x4 payload:
  • Up to 7,650 pounds of towing capacity
  • Up to 1,600 pounds of payload capacity
• Crew cab configuration features a durable five-foot steel bed with covered external power source and strong integrated tie-downs, providing versatility for flexible cargo options
• Modern, authentic design instantly recognizable as a Jeep®:
  • Iconic keystone-shaped grille, round headlamps and square tail lamps
  • Rugged-yet-distinguished design bolsters aerodynamics
  • Convenient fold-down windshield for off-road purists
  • The only true open-air 4x4 pickup truck with easy-to-use premium soft top and two hardtops
  • Dozens of different door, top and windshield combinations
• Lightweight, high-strength aluminum doors, hinges, hood, fenders, windshield frame and tailgate help curtail weight and boost fuel economy
• Suspension tuned to optimize on-road handling and ride comfort without sacrificing off-road capability, payload or towing capability
• Advanced fuel-efficient powertrains:
  • 3.6-liter Pentastar V-6 engine with Engine Stop-Start (ESS)
    • Eight-speed automatic or six-speed manual transmission
  • 3.0-liter EcoDiesel V-6 with ESS and an eight-speed automatic transmission available in 2020
• Fourth-generation Uconnect system includes Apple CarPlay, Android Auto and the choice of 7.0- or 8.4-inch touchscreens with pinch-and-zoom capability
  • Forward-facing off-road camera available on Rubicon allows obstructions on the trail to be easily seen
• Packed with more than 80 available advanced safety and security features

November 28, 2018 , Los Angeles - The all-new 2020 Jeep® Gladiator – the most capable midsize truck ever – builds on a rich heritage of tough, dependable Jeep trucks with an unmatched combination of rugged utility, authentic Jeep design, open-air freedom, clever functionality and versatility, best-in-class towing and 4x4 payload, advanced fuel-efficient powertrains, superior on- and off-road dynamics and a host of innovative safety and advanced technology features.

“Unquestionably a truck and instantly recognizable as a Jeep, the all-new 2020 Gladiator is the ultimate vehicle for any outdoor adventure,” said Tim Kuniskis, Head of Jeep Brand - North America. “There is tremendous demand for this unique vehicle from our loyal Jeep customers and pickup truck buyers everywhere. Born from a rich and proud heritage of tough, dependable Jeep trucks, Gladiator combines rugged utility, versatility and functionality resulting in the most capable midsize truck ever.”

The all-new 2020 Jeep Gladiator delivers unmatched capability with best-in-class towing and 4x4 payload capacity, composed on-road driving dynamics and passenger safety. Legendary off-road capability comes courtesy of the Command-Trac and Rock-Trac 4x4 systems, third-generation Dana 44 axles, Tru-Lock electric front- and rear-axle lockers, Trac-Lok limited-slip differential, segment-exclusive sway-bar disconnect and 33-inch off-road tires.

The 2020 Jeep Gladiator is available in these different trim configurations: Sport, Sport S, Overland and Rubicon.

Built in Toledo, Ohio, the all-new 2020 Jeep Gladiator arrives in showrooms in the second quarter of 2019.

Modern take on authentic Jeep design
The all-new 2020 Jeep Gladiator boasts a rugged, distinguished design aesthetic that is immediately recognizable with traditional Jeep design cues.  

The Jeep design team kept the legendary seven-slot grille seen on Wrangler, but widened the grille slots for additional air intake to assist with the increased towing capacity. The top of the keystone-shaped grille is gently swept back to enhance aerodynamics.
 
Gladiator Overland and Rubicon models offer available LED headlamps and fog lamps that project crisp white lighting, adding to the truck’s modern look. Gladiator models equipped with LEDs feature daytime running lights, which form a halo around the outside perimeter of the headlights. Forward turn signals are positioned on the front of the trapezoidal wheel flares.

From behind, traditional square tail lamps feature available LED lighting and give way to a wide tailgate opening for unobstructed loading of cargo into the bed. The tailgate is damped and capable of stopping in three positions, while cargo is easily secured with a power-locking tailgate.

Clever functionality and versatility were the focus while designing the Gladiator’s durable bed to streamline usability. Under-rail bed lighting, an available covered external power source (400W 115-volt, three-prong) and strong integrated tie-downs, provide durability and versatility. The available Trail Rail Cargo Management System provides additional storage options to organize and secure cargo.

The full-size spare tire and mount is located under the bed, behind the rear axle and capable of holding up to a 35-inch tire.
 
An available spray-in bed liner, bed divider and tonneau cover provide even more options to keep cargo secure while helping with durability. Gladiator Rubicon models are equipped with protective cab and cargo bed rock rails.  
 
A four-bolt design at the top of the windshield’s frame allows for the windshield to fold down quickly and easily. A header bar connects the A-pillars and stays in place even when the windshield is folded down. This allows the rearview mirror to remain in place even with the windshield folded.
 
Two-piece body-color fender flares with a black lower insert give a raised profile and are standard on Overland and available on Rubicon models. 

Lightweight, high-strength aluminum doors feature the Torx bit size stamped directly onto the hinge to eliminate guessing which size bit is needed to remove the doors. A tool kit with the necessary Torx bits to remove the doors and lower the windshield is provided as standard equipment.  
 
All Gladiators feature body-color sport bars, which are welded to the body and feature integrated grab handles for front occupants.
 
A premium Sunrider soft top provides a segment-exclusive easy open-air option, which helps to quiet wind noise and allows for access to partial and full open top positions. The soft top features retainers that slide into a track for easy rear window removal.
 
Gladiator Overland and Rubicon models share an available three-piece body-color hardtop option, offering a unique, premium appearance, while a black three-piece hardtop, available on all models, offers even more options for open-air driving. The two Freedom panels and quick-release latches enable a fast removal and installation of the hardtop. All hardtops feature a manual rear-sliding window.
 
Dozens of different door, top and windshield combinations allow for endless configuration possibilities.

Authentic interior design boasts premium features and technology
The new 2020 Jeep Gladiator’s interior combines authentic styling, versatility, comfort and intuitive feature use. Precision craftsmanship and high-quality materials are found throughout the cabin.
 
The heritage-inspired center stack features a clean, sculpted form that complements the horizontal dashboard design and sports a finish dictated by the model choice. A hand-wrapped instrument panel features a soft-touch surface with accent stitching on Gladiator Overland and available on Rubicon models. Functional features, including climate and volume control knobs, media charging and connectivity ports, and Engine Stop Start (ESS) control are all sculpted for quick recognition and are easily within reach of the front-seat occupants. Inboard and outboard circular HVAC vents are surrounded by a platinum chrome bezel for a precise and premium yet rugged appearance with full functionality.
 
Jeep functionality and versatility are celebrated in the center console and distinguished with metal-plated accents. The center console houses gear shift selection, transfer case and parking brake. Real bolts featured on the shifter, grab handles and the infotainment screen’s frame highlight genuine construction methods.
 
A push-button starter, featuring a weather-proof surround, is standard on the 2020 Gladiator and is easily located within the driver’s reach.
 
Cloth or leather-contoured seats feature accent stitching and adjustable bolster and lumbar support. Available comfort features include heated front seats and steering wheel.

All-new rear seats feature high-quality premium materials giving the seats an athletic look that also delivers comfort and support. The rear seats, exclusive to Gladiator, feature segment-leading rear legroom and utilizes a unique design that can be locked in place to provide secure storage behind the seat back. The rear seats can be folded flat to access cab-back storage and provide a load floor for larger items.
 
With the rear seats folded flat, LED lights on the quarter trim panels illuminate the storage space behind the seats. Two storage nets on the cab-back wall provide even more secure storage.
 
Clever storage solutions are found throughout the 2020 Gladiator, including durable mesh pockets that extend the entire length of the doors and numerous phone storage areas.
 
The rear seat cushions can fold up into “stadium” position to reveal a standard open storage bin, which utilizes the space under the seat for stowing miscellaneous items. An optional lockable bin provides secure storage space when the top or doors are removed. The available lockable storage bin features two different size doors that correspond to the 60/40 split rear seat cushion. Removable dividers can provide up to five separate compartments and uses the same lock as the glove box and center console.
 
A removable bolt bin fits in the under-seat storage space and makes it easy to secure bolts when the doors and top are removed, or the windshield is folded down. The bolt bin lid indicates the corresponding number of bolts and their location under the lid in Petroglyph style.
 
The driver and front passenger vinyl-wrapped door-trim panels are soft to the touch. Lift-Assist handles under each door armrest feature an integrated pull-cup design that makes door removal quick and easy. Convenience features include passive entry with Keyless Go.
 
The instrument cluster features a 3.5- or an available 7-inch thin-film transistor (TFT) information LED display. The 7-inch LED display allows the driver to configure information in more than 100 ways, including current media being played, tire pressure, tire-fill alert or digital speed readout. Integrated buttons on the steering wheel control audio, voice and speed functions, allowing the driver to keep hands on the wheel at all times.
 
A 7.0- or an available 8.4-inch touchscreen houses the fourth-generation Uconnect system and sits prominently atop the center stack. The fourth-generation Uconnect system enhances the user interface and system performance with quicker startup times and improved screen resolution. A 5.0-inch touchscreen is standard on Gladiator Sport. Directly below the touchscreen are functional features, such as climate and volume control knobs and media connectivity ports.
 
Exclusive to Gladiator Rubicon models, a forward-facing off-road camera allows obstructions ahead on the trail to be easily seen. The front camera sits behind the middle slot of Gladiator’s seven-slot grille and can be accessed through the available Off-road Pages.
 
Two USB ports and a USB-C port up front and two in reach of occupants in the back seat connect to the media center. A 115-volt AC outlet is available to power select three-pronged home electronics.

Optional audio upgrades include a subwoofer and portable wireless speaker located behind the rear seat. LED lights on quarter-trim panels illuminate the storage space and the docking station for the wireless speaker. A net on the left side of the cab wall provides additional storage when equipped with the subwoofer and wireless speaker.

Advanced fuel-efficient powertrains
The all-new Jeep Gladiator offers the proven 3.6-liter Pentastar V-6 engine at launch with a 3.0-liter EcoDiesel V-6 engine being offered in 2020.  
 
3.6-liter Pentastar V-6 engine
The FCA US 3.6-liter Pentastar V-6 engine delivers 285 horsepower and 260 lb.-ft. of torque and features ESS as standard equipment. It is engineered to provide a broad torque band with a focus on low-end torque, an essential trait needed for extreme off-roading.
 
A six-speed manual transmission is standard on all Gladiator models equipped with the 3.6-liter Pentastar V-6, and an eight-speed automatic transmission is optional.
 
Known for its refinement, power, efficiency and adaptability, the Company has produced more than 8.6 million 3.6-liter V-6 Pentastar engines since production began in 2010. The award-winning engine family is currently built at three plants – Trenton (Michigan) Engine Complex, Mack Avenue (Detroit) Engine and Saltillo (Mexico) South Engine.
 
The 2020 Jeep Gladiator benefits from the popular V-6 engine’s low-range torque, which is needed when out on the trails or during demanding conditions, such as hauling cargo or towing a trailer. 
 
3.0-liter EcoDiesel V-6 engine
The 3.0-liter EcoDiesel engine will be available starting in 2020. Gladiator models will offer the 3.0-liter EcoDiesel V-6 engine, rated at 260 horsepower and 442 lb.-ft. of torque, with ESS standard. An eight-speed automatic transmission is standard and is designed to handle the increased torque output.
 
FCA US engineers adapted the engine – designed and manufactured by FCA EMEA – to meet the NAFTA region’s regulatory requirements.
 
The EcoDiesel V-6 engine implements refined turbocharger technology with a low-friction bearing designed for low-end and transient performance. The EcoDiesel V-6 engine also features low-friction pistons to improve fuel economy, reduce greenhouse gas emissions and provide an enhanced combustion system – injector nozzle, piston bowl and glow plug with integrated combustion pressure sensor to optimize combustion. Low Pressure Cooled Exhaust Gas Recirculation (EGR) assists to combine with the high-pressure system to expand the range of EGR usage and to improve fuel economy.
 
Eight-speed automatic transmission
The new 2020 Jeep Gladiator offers an eight-speed automatic transmission, enabling the vehicle to optimize engine output while on the trails or enjoying smooth, efficient power delivery at highway speeds. The eight-speed automatic is available on all Jeep Gladiator models.
 
Gladiator’s eight-speed automatic transmission offers a responsive driving experience. Whether commuting during the week or rock crawling or hauling cargo on the weekend, customers will enjoy a smooth, linear power delivery and improved fuel efficiency.
 
A unique set of two overdrive ratios improve highway fuel economy and reduce overall noise, vibration and harshness (NVH) levels.

Uniquely suited to the requirements of the Gladiator Rubicon model, the eight-speed automatic transmission delivers a 77.2:1 crawl ratio. The towing and 4x4 performance benefits from a 4.7:1 first gear ratio coupled with a 4.1:1 final drive delivers unmatched capability.
 
Six-speed manual transmission
All-new 2020 Jeep Gladiator models are equipped with the standard six-speed manual transmission. This transmission features a unique design that employs optimized gear ratios for bolstered crawl ratio performance and is cable-operated, eliminating shifter vibration and bolstering sound isolation.
 
The shift pattern features a comfortable shifting position and bolsters shift accuracy. A 4.41 ratio spread offers impressive fuel efficiency at faster speeds and delivers quick acceleration with smooth, precise shift quality.

Most capable midsize truck ever without compromise
The all-new 2020 Jeep Gladiator delivers legendary off-road capability courtesy of two advanced 4x4 systems. The Command-Trac 4x4 system, standard on Sport and Overland, features a two-speed transfer case with a 2.72:1 low-range gear ratio, and heavy-duty third-generation Dana 44 front and rear axles with a 3.73 rear axle ratio.
 
On Gladiator Rubicon, a Rock-Trac 4x4 system features heavy-duty third-generation Dana 44 front and rear axles with a “4LO” ratio of 4:1. A 4.10 front and rear axle ratio is standard as are Tru-Lok locking differentials.
 
Gladiator Rubicon models offer improved articulation and total suspension travel with help from a segment-exclusive electronic sway-bar disconnect. With the standard six-speed manual transmission, Gladiator Rubicon has an impressive crawl ratio of 84.2:1, and 77.2:1 on Rubicon models equipped with the optional eight-speed automatic transmission – both of which make scaling any obstacle on the trail easy.
 
Both Command-Trac and Rock-Trac systems offer full-time torque management, enabling optimal grip in low-traction conditions.
 
An available Trac-Lok limited-slip rear differential on Sport and Overland provides extra torque and grip during slippery, low-traction situations, such as driving over sand, gravel, snow or ice.
 
Gladiator Sport, Overland and Rubicon models receive a Trail Rated badge thanks to legendary Jeep 4x4 capability, which includes features such as:

• Command-Trac 4x4 system with 2.72:1 crawl ratio standard on Sport and Overland models
• Rock-Trac 4x4 system with a “4LO” ratio of 4:1 and Tru-Lok locking differentials standard on Rubicon models
• Skid plates and front and rear tow hooks
• Standard on Rubicon rear steel heavy-duty off-road rear bumper and available front steel winch-ready bumper with removable end caps
• Approach angle of 43.6 degrees, breakover angle of 20.3 degrees, departure angle of 26 degrees and ground clearance of 11.1 inches
• Aggressive available 17-inch off-road wheels; Rubicon models get 33-inch tires standard
• Up to 30 inches of water fording
• Up to 7,650-lb. towing and 1,600-lb. 4x4 payload capacity

Rugged body-on-frame design is the foundation for legendary Jeep truck utility and durability 
The 2020 Jeep Gladiator utilizes a variety of ways to optimize ride, handling and sound characteristics while bolstering fuel economy even while towing and hauling. Utilizing a body-on-frame design and featuring a superbly engineered five-link suspension system, Gladiator delivers on capability, with composed on-road driving dynamics, passenger safety and best-in-class towing and 4x4 payload capacity.
 
Gladiator’s body-on-frame design uses advanced materials and engineering to be lightweight, yet stiff and durable, and features an all-new lightweight, high-strength steel frame. When compared to Jeep Wrangler 4-door, Gladiator’s frame is an additional 31 inches longer while the wheelbase is 19.4 inches longer. The longer wheelbase and the bed’s positioning center aft of the rear axle centerline enables for better weight distribution and a more comfortable and composed ride when carrying cargo. The prop shaft, brake, fuel lines and exhaust system were lengthened to accommodate the changes needed to make the proven body-on-frame design work with the most capable midsize truck ever. 
 
A traditional steel bed utilizes four steel cross-members to reinforce the load floor while the aluminum tailgate is damped. Utility and versatility are maximized with strong integrated tie-downs, under-rail bed lighting and an optional covered external power source.
 
To protect critical vehicle components while on the trail, including the fuel tank, transfer case and automatic transmission oil pan, Gladiator employs four skid plates and bars. Rubicon models benefit from the use of heavy gauge tubular steel rock rails to curtail potential body damage inflicted while out on the trail. Rubicon models also feature segment-exclusive rock rails for the bed corners. 

The use of lightweight, high-strength aluminum closures, including the doors, door hinges, hood, fender flares, windshield frame and tailgate, help curtail weight and boost fuel economy. Other ways the Jeep engineering team looked to manage weight included using hollow track and stabilizer bars, aluminum engine mounts and steering gear.
 
Gladiator utilizes the proven five-link coil suspension configuration with the front suspension using a lateral control arm and four longitudinal control arms. Full-width track bars made of forged steel control lateral movement of the axle with minimal angle change during suspension travel.
 
The rear five-link coil suspension design, exclusive to Gladiator, features two upper and two lower forged steel control arms for longitudinal control, and a track bar for lateral axle control. The control arms are located under of the frame rails while the rear shocks are forward facing to provide consistent damping for ride comfort and load management.
 
The springs have been tuned for an optimum balance between on-road handling while providing a comfortable ride around town, with or without cargo in the bed, and legendary off-road capability. Ride comfort, body-roll control, handling, payload and towing capability is significantly enhanced with assistance from shock tuning, hard points and body mount strategy.

An approach angle of 43.6 degrees, breakover angle of 20.3 degrees, departure angle of 26 degrees and a ground clearance of 11.1 inches allows Gladiator to go anywhere.
 
Gladiator also benefits from up to 30 inches of water fording, up to 1,600 pounds of payload and up to 7,650 pounds of towing capacity with the available Max Towing Package.

More than 80 available advanced safety and security features
Safety and security were paramount in the development of the all-new 2020 Jeep Gladiator, which offers more than 80 available active and passive safety and security features. Available features include Blind-spot Monitoring, Rear Cross Path detection, forward-facing off-road camera, standard ParkView rear backup camera with dynamic grid lines, Adaptive Cruise Control and electronic stability control (ESC) with electronic roll mitigation.

Fourth-generation Uconnect system delivers advanced technology
The all-new 2020 Jeep Gladiator offers three Uconnect systems – Uconnect 5-inch, 7-inch and 8.4NAV, delivering communication, entertainment and navigation features drivers and passengers desire, including a full-color LED instrument cluster.

The Uconnect system includes easy-to-use features, enhanced processing power, faster startup times and touchscreens that display high-resolution graphics.
 
Apple CarPlay and Android Auto features
The all-new 2020 Jeep Gladiator is available with the Uconnect 7.0 or 8.4NAV systems and includes the new Apple CarPlay and Android Auto features.
 
Apple CarPlay
Seamlessly integrates an iPhone with the vehicle’s built-in display and controls in addition to featuring Siri Voice control. iPhone-equipped drivers can make phone calls, access music, send and receive messages, and receive voice-guided navigation optimized for traffic conditions and more, while staying focused on the road.
 
Android Auto
System shares useful information when driving and makes it easy to access the best of Google technology. Featuring Google Maps with free voice-guided navigation, live traffic information and lane guidance, as well as on-demand access to 30 million songs with Google Play Music, the ability to place phone calls or send and receive messages while keeping hands on the wheel and ask Google search any question, Android Auto makes it easy to access popular apps and content from the Uconnect system’s touchscreen.
 
Drivers and passengers also have an abundance of infotainment features at their fingertips with SiriusXM Radio, Travel Link, Traffic and Connected Services that provide real-time information.

View full article

[frogger]

Nice shot

 

[G. David Felt]

Sweet, nice ride!

[balthazar]

Ah; it's a Wrangler with a mini bed. As you guys would likely assume, I was picturing a modern take on the original; a uniquely styled true pick-up.

Probably as good a spot as any to remind folk of the Mighty FC :

[ocnblu]

LOL what is the point of all that capacity with NO ROOM IN THE BED to haul things?  The Mighty FC casts quite the blight on the Gladiator, which needs a shorter cab and at least 1.5' longer bed floor to be useful.

[G. David Felt]

5ft bed is more than useful for most buyers, 6ft or 8ft is not needed by the bulk of buyers running to the nursery or Home Depot for weekend projects.

Jeep has clearly judged their buyers right as weekend projects or off road play / camping.

Commercial work of a 6 or 8 ft bed is covered just fine by GM, Ford and Ram.

[ocnblu]

So what you're telling me is... this is the Subaru Baja of Jeeps?

[Robert Hall]

I think it’s like a a Wrangler Unlimited with a big trunk.  Pretty cool.  

[balthazar]

But to clarify- this isn't a pickup, it's a Wrangler with a bed. Problem as I see it is, Jeep is rumored to be charging nearly $20,000 for that bed. Not sure who this is aimed at other than existing Jeep buyers.

[frogger]

I think the H3T had a similar size bed, no 6ft option.

 

 

Edited November 29, 2018 by frogger

[balthazar]

7 hours ago, frogger said:

I think the H3T had a similar size bed, no 6ft option.

google sez 59", or 5-ft. I kinda forgot about the H3T, but the entire Hummer line always seemed like 'appearance package' trucks rather than actually being used as trucks (other than 4x4ing). I just think Jeep missed an opportunity to get in the pickup game by just stretching a Wrangler and calling it a day. Wranglers have their legion of fans, of course, but they are archaic and uncomfortable vehicles that people either are all in for, or have no interest in. I don't see a Wrangler pickup getting cross shopped with other small pickups at ALL.

[Robert Hall]

I noticed a build configurator for the Gladiator is up on the Jeep website,  similar trim levels to the Wrangler.  But no pricing of models or options up yet. 

[G. David Felt]

Weird to build one and not have pricing.

https://www.jeep.com/build.gladiator.2020#/models/zipcode/98043/vehicle/CUJ202011/ccode/CUJ202011JTJS98A/llp/2TR/options/ERC,DEM,TW2,WFJ,D5,UAG,DMF,SDD,X9,PUA,23R,APA

[balthazar]

If no one else has come forth with this, I may as well stake my flag : 'Wranglerator'.

(pats self on back)

[ocnblu]

I built mine:  $73,259.00 for a base Sport with stick.  No options.  Turns out, doors and roof are bundled in an "all-weather" option package that also includes automatic parking, lane departure, auto-pilot, Yosemite Sam mudflaps and a dash-mounted hula girl for an additional $11,500.  I could not see spending that much for a hula girl.

Edited December 15, 2018 by ocnblu