Jump to content
Create New...

Subaru News: Rumorpile: End of the Line For Subaru's Six-Cylinder Engine?


William Maley

Recommended Posts

Subaru might be the next automaker to follow the downsizing trend. Speaking with Australian outlet CarAdvice.com.au, Yoichi Hori, Subaru's deputy general manager engineering department mentioned the possibility of dropping their six-cylinder engine - used in the Legacy and Outback models - and replacing it with a turbocharged four-cylinder.

“Our research said the six-cylinder model is decreasing in the world. So that’s why probably the future, many companies take the smaller displacement with a turbocharger, or diesel, or hybrid," said Hori.

As for a possible engine size, Hori mentioned that a 2.0L would be just right.

“In terms of the body size, a 2.0-litre with a turbocharger is enough, I think.”

Source: CarAdvice.com.au


View full article

Link to comment
Share on other sites

It makes sense.  Most everyone can get 300 hp out of a 2.0T these days... GM was doing it 8 years ago.   GM has a 1.6T that can do 200 hp and 200 lb-ft of torque in Europe that will eventually make its way to the US, Ford's 1.6T makes 180 hp and 180 lb-ft, the 2.3T makes Northstar V8 like numbers but does so at a lower RPM. 

 

The main reason for wanting a V6 or I6 is for smoothness and refinement, but that doesn't really apply to an H-6 like Subaru's

Link to comment
Share on other sites

The other thing I forgot to mention.  Subaru's 6-cylinder only puts out about 260 hp and 240 lb-ft of torque and it has a low take rate.   Almost any 2.0T can hit those numbers easily, so why should Subaru shoulder the cost of an extra engine line?  By offering a less expensive upgraded engine, Subaru can probably talk more people into paying for it while Subaru also gets lower development costs.

Link to comment
Share on other sites

The problem with Subaru's six cylinder is nearly the same problem as every one else's; They haven't advanced technology wise. In 2005, Subaru offered three engines in the Legacy/Outback. A 2.5L NA H4, a 2.5L Turbo H4, and a 3.0L NA H6 were available. Let's just focus on the latter two.


 


The 2.5T was, at the time, rated for 250 hp & 250 lb ft of torque (this was later re-rated under SAE at 243 and 241). The 3.0 was rated for 250 hp & 219 lb ft of torque (also re-rated under SAE at 245 and 215). Assuming similar options, equipping the 3.0 adds an additional 50 lbs. Both engines required premium fuel. As you can see, there is really no benefit to choosing the H6 (later the H6 would prove as the more reliable choice, however). Now, let's jump forward 5 years to the next model with its revamped line-up of engines.


 


The 2.5T is now rated at 265 hp & 258 lb ft of torque. The 3.0 has now been bored out to 3.6 and is rated at 256 hp & 247 lb ft of torque. So what happened? Mechanically, the only notable advancement was a new asymmetrical connecting rod allowing them to increase the displacement. So, let's look at power per liter to see what's what. The old 3.0 had 81.6 hp/liter and 71.6 lb/ft/liter. The new 3.6 now has more at... Oh, wait, no... less, much less, at 71.1 hp/liter and 68.6 lb/ft/liter. All that work to increase bore & stroke for nothing. Okay, so what have they really pulled off here? Well, peak power is now available at 600 less RPM (but peak torque requires an extra 200 RPM), premium fuel is no longer required, and general NVH improvements have been made. This engine hasn't changed with the latest generation and is, in a word, underwhelming.


 


Subaru has a long history of offering turbo-charged H4 engines. Besides AWD, it is probably what they are known for most. While I haven't always agreed with replacing 6 cylinders with turbo 4's, in a Subaru, it just feels right. I loved every bit of my Subaru Legacy 2.5 GT with its turbo. I would love to see Subaru reinvest in a similar set-up.


Edited by blackviper8891
  • Agree 1
Link to comment
Share on other sites

  • 3 weeks later...

I think a change has been needed, and may cost less in parts when going for repairs as sometimes these cars can cost more in parts than the auctual labour work that goes into fixing the car and should happen this year when the new cars get built with smaller engines and maybe just at 2 liter or just under would be good. The technology should be advanced and improved and made better with a 2litre no need to make it any higher than it is needed as in the article it is not as popular as it used to be as well. I know someone who owns a subaru think it is a 2.5 litre and has a big engine does consume petrol more when driving in town and going up the hill where he lives so a change is needed.

Link to comment
Share on other sites

  • 2 weeks later...

Subaru could really take a lesson from Porsche, I mean they have invested heavily into the opposed 6 and they have the knowledge. Subaru collaborates with toyota on the BRZ, why not Porsche? I'll tell ya why, subaru's target audience is looking for reliable awd cars that get decent gas mileage. Like some of you mentioned earlier, car companies are looking to downsize engine displacement.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Hey there, we noticed you're using an ad-blocker. We're a small site that is supported by ads or subscriptions. We rely on these to pay for server costs and vehicle reviews.  Please consider whitelisting us in your ad-blocker, or if you really like what you see, you can pick up one of our subscriptions for just $1.75 a month or $15 a year. It may not seem like a lot, but it goes a long way to help support real, honest content, that isn't generated by an AI bot.

See you out there.

Drew
Editor-in-Chief

Write what you are looking for and press enter or click the search icon to begin your search