DCX to Produce Their Own DSG

[Variance]

DCX to Produce Their Own DSG

*Above pictured is Volkswagen's DSG.

DaimlerChrysler has recognized the benefits of the DSG over conventional, torque converter-equipped automatics and has decided to invest $560 million in a new assembly plant in Kokomo, Indiana to manufacturer their own version of the DSG. Partnering with Getrag, the automaker plans on creating 700,000 units annually, with production set to begin in 2009. The models that stand to benefit from the new transmission are primarily front-wheel drive vehicles, including the Avenger, Sebring and all manner of minivan. Additionally, the transmission will find an ideal partner with D.C.'s new Phoenix V6 engine, which will also make an appearance in 2010.

Read "Chrysler developing dual-clutch tranny for FWD vehicles" @ Autoblog

[Drew Dowdell]

I think this thing's only hope is the fact that DCX partnered with Getrag to produce it. Hopefully, Getrag won't let them f it up too much.

[FAPTurbo]

Chrysler dealing with state of the art mechanical technology?...

I doubt anything bad can come of this............................ right?..........................

Edited October 9, 2006 by Captainbooyah

[Guest YellowJacket894]

"Phoenix" V6?

Doesn't GM still have rights to that name?

[Chicagoland]

Chrysler dealing with state of the art mechanical technology?...

I doubt anything bad can come of this............................ right?..........................

203001[/snapback]

Well, it isn't just Ma Mopar anymore, this is coming from DCX, DaimlerChrysler. So, it is really coming from Damiler in Germany, not the home of 'make sure you carry a spare ballast resistor' electical systems.

[Chicagoland]

"Phoenix" V6?

Doesn't GM still have rights to that name?

203005[/snapback]

I'd bet any name associated with the X cars has been dropped from GM.

[Drew Dowdell]

Well, it isn't just Ma Mopar anymore, this is coming from DCX, DaimlerChrysler. So, it is really coming from Damiler in Germany, not the home of 'make sure you carry a spare ballast resistor' electical systems.

203009[/snapback]

I'd venture to guess that more of it is coming from the Getrag part of the partnership

[regfootball]

GM is working on a DSG type tranny also I think. Its the wave of the future. That, and CVT's.

[MyerShift]

Even if Ma Mopar were in charge, I doubt they would screw it up as badly as you guys are claiming.

I'm sure Chrysler learned from the "Ultradrive" four speed automatics of the early `90's.

Allpar claims that with the development of the 6-speed version of the current (and vastly improved) 4-speed automatic, Chrysler hopes to rekindle memories of the durable 3-speed TorqueFlite unit.

[the_yellow_dart]

Interesing.

On a side note, how do you pronounce Getrag? guh-trag or gee-trag?

[MyerShift]

I've only heard it as Gee-Trag.

But then again, it might end up as the EEE-ko-tek versus ECHO-tek

[haypops]

Chrysler hopes to rekindle memories of the durable 3-speed TorqueFlite unit.

203069[/snapback]

Does that mean they will be using push buttons instead of paddle shifters?

[sciguy_0504]

This sounds good and it's nice to see DCX doing something technologically advanced.

[Variance]

This sounds good and it's nice to see DCX doing something technologically advanced.

203088[/snapback]

Are we forgetting the HEMI engine with "fuel-saving Emm Dee Ess"? :AH-HA_wink:

[Intrepidation]

Are we forgetting the HEMI engine with "fuel-saving Emm Dee Ess"? :AH-HA_wink:

203193[/snapback]

Which Honda and GM now under a different name. DCX just mass-marketed it (sucessfully) first. Don't knock it too much

I rponounce it Ge (as in "get") -trag

[pow]

DSG is a great alternative to power-sapping torque converter automatics. It works well on small-engined economy cars, which need all the help they can get.

[MyerShift]

Does that mean they will be using push buttons instead of paddle shifters? 

203077[/snapback]

Sure, why not?

Paddle shifters, push buttons, it's all the same.

[rosserman]

Even if Ma Mopar were in charge, I doubt they would screw it up as badly as you guys are claiming.

I'm sure Chrysler learned from the "Ultradrive" four speed automatics of the early `90's.

Allpar claims that with the development of the 6-speed version of the current (and vastly improved) 4-speed automatic, Chrysler hopes to rekindle memories of the durable 3-speed TorqueFlite unit.

203069[/snapback]

I love the old TorqueFlite. I have seen them hold together very well in everything from an old truck to race cars